Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump

January 29, 2019 NHTSA CAMPAIGN NUMBER: 19V060000

Reduced Fuel Pump Performance May Cause Stall

Reduced fuel pump performance can result in an engine stall, increasing the risk of crash.

 

NHTSA Campaign Number: 19V060

Manufacturer Honda (American Honda Motor Co.)

Components FUEL SYSTEM, OTHER

Potential Number of Units Affected 437,032

 

Summary

Honda (American Honda Motor Co.) is recalling certain 2016-2018 Acura MDX, 2015-2019 Acura TLX and 2015-2017 Honda Accord vehicles, equipped with a 3.5L V6 engine. Particulates in fuel may adhere to the internal components of the fuel pump, reducing its performance.

 

Remedy

Honda will notify owners, and dealers will update the fuel injection engine control unit (FI-ECU) software and, if necessary, replace the fuel pump, free of charge. The recall began March 25, 2019. Owners may contact customer service at 1-888-234-2138. Acura’s recall number for this recall is P3W. Honda’s recall number for this recall is N3X.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Acura has a Recall

 


Service Bulletin
B19-011
February 13, 2019
Version 3

 

Safety Recall: 2016-18 MDX and 2015-19 TLX V6 Fuel Pump

Supersedes 19-011, dated January 31, 2019. See REVISION SUMMARY.

 

AFFECTED VEHICLES

Year Model Trim VIN Range
2016-18 MDX ALL Check the iN VIN status for eligibility.
2015-19 TLX V6 ALL Check the iN VIN status for eligibility.

 

REVISION SUMMARY

This bulletin has been extensively revised. American Honda recommends that you thoroughly read this entire bulletin.

 

BACKGROUND

Under certain driving conditions using fuel with high sodium content and with other ambient conditions present, the fuel pump may fail to provide enough fuel to the engine, leading to a stall.

 

CLIENT NOTIFICATION

Owners of affected vehicles will be sent a notification of this campaign.

Do an iN VIN status inquiry to make sure the vehicle is shown as eligible.

Some vehicles affected by this campaign may be in your new or used vehicle inventory.

Failure to repair a vehicle subject to a recall or campaign may subject your dealership to claims or lawsuits from the client or anyone else harmed as a result of such failure. To see if a vehicle in inventory is affected by this safety recall, do a VIN status inquiry before selling it.

 

CORRECTIVE ACTION

Update the PGM-FI software. Only clients that specifically reported a stall condition, verified with the on-board snapshot, will qualify for the in-tank fuel pump replacement.

 

WARRANTY CLAIM INFORMATION

If you did this service bulletin after February 12, 2019, use the Warranty Claim Information provided below in white.

Operation
Number
Description Flat
Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed
Part
Number
2235A9 Procedure A – Update the PGM-FI software. Includes CKP pattern clear and idle learn. 0.2 hr 6GS00 P3W00 B29011A 17045-TZ5-A10
2235A9 Procedure A – Update the PGM-FI software. Includes CKP pattern clear and idle learn. 0.2 hr 6GS00 P3W00 B29011B 17045-TZ5-A10
A Inspect the on-board snapshot and verify the engine stall. 0.2 hr
Operation
Number
Description Flat
Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed
Part
Number
2235A8 Procedure B (MDX) Update the PGM-FI software, and replace the low pressure fuel pump module. Preapproval needed. See the iN parts catalog for ordering. Includes CKP pattern clear and idle learn. 1.2 hr 6GS00 P3W00 B29011C 17045-TZ5-A10
A Inspect the on-board snapshot and verify the engine stall. 0.2 hr
2235A8 Procedure B (TLX

2WD) – Update the PGM-FI software, and replace the low pressure fuel pump module. Pre-approval needed. See the iN parts catalog for ordering. Includes CKP pattern clear and idle learn.

1.0 hr 6GS00 P3W00 B29011D 17045-TZ5-A10
A Inspect the on-board snapshot and verify the engine stall. 0.2 hr
Operation
Number
Description Flat
Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed
Part
Number
2235A8 Procedure B (TLX

AWD) – Update the PGM-FI software, and replace the low pressure fuel pump module. Pre-approval needed. See the iN parts catalog for ordering. Includes CKP pattern clear and idle learn.

1.0 hr 6GS00 P3W00 B29011E 17045-TZ5-A10
A Inspect the on-board snapshot and verify the engine stall. 0.2 hr

 

Skill Level: Repair Technician

If you did this service bulletin on or before February 12, 2019, use the Warranty Claim Information provided below shaded in grey.

Operation
Number
Description Flat
Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed
Part
Number
2235A7 Procedure A (ALL models) – Update the PGM-FI software. Includes checking the on-board snapshot, idle learn and CKP pattern clear/learn. 0.4 hr 6GS00 P3W00 B19011A 17045-TZ5-A10
2235A8 Procedure B (MDX) Update the PGM-FI software, and replace the low pressure fuel pump module. Includes checking the on-board snapshot, idle learn and CKP pattern clear/learn. 1.2 hr 6GS00 P3W00 B19011B 17045-TZ5-A10
2235A8 Procedure B (TLX 2WD) – Update the PGM-FI software, and replace the low pressure fuel pump module. Includes checking the on-board snapshot, idle learn and CKP pattern clear/learn. 1.0 hr 6GS00 P3W00 B19011C 17045-TZ5-A10
2235A8 Procedure B (TLX AWD) – Update the PGM-FI software, and replace the low pressure fuel pump module. Includes checking the on-board snapshot, idle learn and CKP pattern clear/learn. 1.0 hr 6GS00 P3W00 B19011D 17045-TZ5-A10

 

Skill Level: Repair Technician

 

SOFTWARE INFORMATION

i-HDS Software Version: 1.004.060 or later

J2534 Rewrite Software Information:

  • PC Application Version 1.0.6 or later
  • Database update 27-DEC-2018 or later

NOTES

  • Unnecessary or incorrect repairs resulting from a failure to update the i-HDS are not covered under warranty.
  • Before beginning the repair, make sure that both the i-HDS and J2534 Rewrite software are updated as listed above.
  • Do only the update listed in this service bulletin.

For more information about updating the i-HDS, the MVCI, and vehicle systems, refer to service bulletin 01-026, Updating Control Units/Modules.

Year/Model Software
System
Program ID
(or later)
Program P/N
(or later)
2016 MDX 2WD Base, Technology Package, and Technology with Entertainment Package PGM-FI J64160 37820-5J6-416
2016 MDX 2WD Base, Technology Package, and Technology with Entertainment Package (with AcuraWatch Plus) PGM-FI J64170 37805-5J6-417
2016 MDX 2WD With Advance Package and Advance with Entertainment Package PGM-FI J65160 37820-5J6-516
2016 MDX SH-AWD® Base, Technology Package, and Technology with Entertainment Package PGM-FI J64190 37805-5J6-419
2016 MDX SH-AWD® Base, Technology Package, and Technology with Entertainment Package (with AcuraWatch Plus) PGM-FI J65150 37805-5J6-515
2016 MDX SH-AWD® With Advance Package and Advance with Entertainment Package PGM-FI J65170 37805-5J6-517

 

 

Year/Model Software
System
Program ID
(or later)
Program P/N
(or later)
2017 MDX 2WD Base, Technology Package, and Technology with Entertainment Package PGM-FI J66700 37805-5J6-670
2017 MDX SH-AWD® Base, Technology Package, and Technology with Entertainment Package PGM-FI J66900 37805-5J6-690
2017 MDX 2WD With Advance Package and Advance with Entertainment Package PGM-FI J67000 37805-5J6-700
2017 MDX SH-AWD® With Advance Package and Advance with Entertainment Package PGM-FI J67100 37805-5J6-710
2018 MDX 2WD Base, Technology Package, and Technology with Entertainment Package PGM-FI BN3050 37805-5BN-305
2018 MDX SH-AWD® Base, Technology Package, and Technology with Entertainment Package PGM-FI BN3070 37805-5BN-307
2018 MDX 2WD With Advance Package and Advance with Entertainment Package PGM-FI BN3060 37805-5BN-306
2018 MDX SH-AWD® With Advance Package and Advance with Entertainment Package PGM-FI BN3080 37805-5BN-308

 

 

Year/Model Software
System
Program ID
(or later)
Program P/N
(or later)
2015-16 TLX Base and Technology Package PGM-FI J23150 37805-5J2-315
2015-16 TLX With Advance Package PGM-FI J23160 37805-5J2-316
2015-16 TLX SH-AWD® With Technology Package PGM-FI J23170 37805-5J2-317
2015-16 TLX SH-AWD® With Advance Package PGM-FI J23190 37805-5J2-319
2017 TLX With Technology Package PGM-FI J24150 37805-5J2-415
2017 TLX With Advance Package PGM-FI J24160 37805-5J2-416
2017 TLX SH-AWD® With Technology Package PGM-FI J24170 37805-5J2-417
2017 TLX SH-AWD® With Advance Package PGM-FI J24180 37805-5J2-418
2018 TLX ALL except SH-AWD® PGM-FI J26000 37805-5J2-600
2018 TLX ALL SH-AWD® PGM-FI J26100 37805-5J2-610
2019 TLX ALL except SH-AWD® PGM-FI J2C720 37805-5J2-C72
2019 TLX ALL SH-AWD® PGM-FI J2C820 37805-5J2-C82

 

 

PARTS INFORMATION

NOTE

The expected failure rate of the fuel pump is very low. Only order the fuel pump and retainer if there is an Engine stall 2 in the on-board snapshot. Do not order for inventory.

Part Name Part Number Quantity
Low pressure fuel pump module 17045-TZ5-A10  1
(MDX)
17045-T2B-A01
(TLX 2WD V6)
17045-TZ7-A00
(TLX AWD V6)

 

 

TOOL INFORMATION

Part Name Part Number Quantity
Fuel pump module locknut wrench 070AA-T0AA100 1
Relay puller 07AAC-000A2A1 1
or
07AAC-000A1A0

 

 

INSPECTION

If the client does not have a complaint of an engine stall, do REPAIR PROCEDURE A – PGM-FI UPDATE. For vehicles in your dealership’s new and used vehicle inventory, do REPAIR PROCEDURE A.

If the client has a complaint about an engine stall, proceed with this inspection.

  1. Connect the i-HDS to the vehicle, and turn the ignition to ON.
  2. Select PGM-FI, Mode Menu, then On-Board Snapshot.

On-Board Snapshot

  1. Select the on-board snapshot titled, Full List – Engine stall 2.

NOTE

There may be several on-board snapshot files. If there is no Engine stall 2 in the on-board snapshot, only do REPAIR PROCEDURE A – PGM-FI UPDATE.

  1. Select the Configuration icon.

Configuration icon

  1. From the list of parameters, select the following:

MDX and TLX AWD:

select the following

  • Fuel Pressure Converted from PF sensor

Fuel Pressure Converted from PF sensor

TLX 2WD:

TLX 2WD: •Engine Speed •Vehicle Speed

F Injector

  • AF Lambda

AF Lambda

  1. Select the Line Graph
    • For MDX and TLX AWD, if Engine Speed is 0 RPM and Fuel Pressure is 0, while Vehicle Speed is greater than 0 MPH, the engine stalled. Proceed to the next step.

Engine Speed is 0 RPM while Vehicle Speed is greater than 0 MPH

  • For TLX 2WD, if Engine Speed is 0 RPM and AF Lambda is 2, while Vehicle Speed is greater than 0 MPH, the engine stalled. Proceed to the next step.

For TLX 2WD, if Engine Speed is 0 RPM and AF Lambda is 2, while Vehicle Speed is greater than 0 MPH, the engine stalled. Proceed to the next step.

NOTE

If the on-board snapshot does not match the examples shown above, the engine stall is not related to this issue in this bulletin. Do REPAIR PROCEDURE A – PGM-FI UPDATE, and continue normal diagnosis for the engine stall.

  1. E-mail the on-board snapshot to Part_Release@ahm.honda.com. Make sure to include the following information to obtain approval to order replacement parts:
  • VIN on the e-mail title and a picture of the VIN label on the door jamb
  • Dealer number
  • Vehicle mileage
  • On-board snapshot including the Engine stall 2 file

The on-board snapshot will be reviewed and you will receive a response within 24 hours.

After the on-board snapshot is reviewed, and the engine stall is NOT related to the fuel pump, or if the engine stall was not verified, do REPAIR PROCEDURE A – PGM-FI UPDATE.

After the on-board snapshot is reviewed, and verified that the engine stall is related to the fuel pump, do REPAIR PROCEDURE B – PGM-FI UPDATE AND FUEL PUMP REPLACEMENT. See the iN parts catalog for ordering instructions.

Do not call Tech Line unless you need additional diagnostic assistance.

 

REPAIR PROCEDURE A – PGM-FI UPDATE

NOTES

  • Connect a fully charged jumper battery to the vehicle and leave it connected during the entire procedure to maintain steady voltage.
  • Never turn the ignition to OFF or ACCESSORY during the update. If there is a problem with the update, leave the ignition turned to ON.
  • To prevent control unit damage, do not operate anything electrical (headlights, audio system, brakes, A/C, power windows, door locks, etc.) during the update.
  • Do not use the MongoosePro VCI tool.
  1. Update the PGM-FI using the i-HDS J2534 rewrite software with the MVCI or DST-i. Refer to Service Bulletin 01-026, Updating Control Units/Modules.
  2. Do the PCM idle learn procedure. Refer to the service information.
  3. Do the CKP pattern – clear/learn procedure. Refer to the service information.
  4. For California residents only: Fill out a Vehicle Emissions Recall – Proof of Correction certificate, and use P3W as the recall number. Give the certificate to your client, and advise him or her to keep it as proof that the recall was completed. Your client will need to submit this certificate to the DMV only if the DMV requests it. If you need more certificates, use reorder number Y0657.

Proof of Correction certificate

 

REPAIR PROCEDURE B – PGM-FI UPDATE AND FUEL PUMP REPLACEMENT

NOTES

  • Connect a fully charged jumper battery to the vehicle and leave it connected during the entire procedure to maintain steady voltage.
  • Never turn the ignition to OFF or ACCESSORY during the update. If there is a problem with the update, leave the ignition turned to ON.
  • To prevent control unit damage, do not operate anything electrical (headlights, audio system, brakes, A/C, power windows, door locks, etc.) during the update.
  • Do not use the MongoosePro VCI tool.
  1. Update the PGM-FI software using the i-HDS J2534 rewrite software with the MVCI or DST-i. Refer to Service Bulletin 01-026, Updating Control Units/Modules.
  2. Replace the low pressure fuel pump module located in the fuel tank. Refer to the service information.
  3. Do the PCM idle learn procedure. Refer to the service information.
  4. Do the CKP pattern – clear/learn procedure. Refer to the service information.
  5. For California residents only: Fill out a Vehicle Emissions Recall – Proof of Correction certificate, and use P3W as the recall number. Give the certificate to your client, and advise him or her to keep it as proof that the recall was completed. Your client will need to submit this certificate to the DMV only if the DMV requests it. If you need more certificates, use reorder number Y0657.

Proof of Correction certificate

END


March 2019

NHTSA Recall 19V-060

 

IMPORTANT SAFETY RECALL

This notice applies to your vehicle: XXXXXXXXXXXXXXXX

 

Dear <First Name Last Name>,

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

 

WHAT IS THE REASON FOR THIS NOTICE?

Acura has decided that a defect which relates to motor vehicle safety exists in certain 2015–2019 model year TLX vehicles equipped with a V6 engine. Fuels containing high sodium content can contaminate certain internal components in the fuel pump and reduce fuel flow to the engine.

 

SAFETY CONSEQUENCE

Reduced fuel flow to the engine combined with vehicle operation in high temperature conditions can restrict vehicle acceleration and/or cause an engine stall, which increases the risk of a crash.

 

EMISSION CONSEQUENCE

The check engine light may illuminate as a result of this defect. Your vehicle may fail a state or local emissions inspection when such tests are required under state law if you do not have the repair done.

 

WHAT WILL ACURA DO?

The dealer will update the software for the engine control unit with programming that eliminates sodium contamination in the fuel pump for free. The dealer will also perform a diagnostic scan on your vehicle and, if the diagnostic scan confirms a previous occurrence of engine stalling, the fuel pump will be replaced for free.

 

WHAT SHOULD YOU DO?

Please call any Acura dealer and make an appointment to have your vehicle’s software programming updated, a diagnostic scan performed and if necessary, the fuel pump will be replaced for free. Once you make an appointment for your vehicle, be advised that the reprogramming process may take approximately 30 minutes. If the fuel pump must be replaced, the total repair process (including software update) may take approximately 1 hour. However, your dealer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time. If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information!

 

CHECK YOUR VEHICLE FOR OPEN RECALLS

You can check your vehicle’s eligibility for repair under this or any other recall. Please access the Acura Recall Lookup tool at www.recalls.acura.com and enter your Vehicle Identification Number (VIN).

 

CALIFORNIA OWNERS ONLY

The DMV will not renew your vehicle’s registration until this emissions recall has been completed. After completing the repair procedure, your dealer will give you a Vehicle Emission Recall – Proof of Correction certificate. Please make sure the dealer completes and provides you the certificate. Keep the certificate for your records as proof that the emissions recall was completed. Submit the certificate to the DMV only if the DMV requests it.

 

EMISSION WARRANTY

In order to ensure your full protection under the emission warranty provisions, it is recommended that you have your vehicle repaired as soon as possible. Failure to do so could be determined as lack of proper maintenance.

 

OWNER INFORMATION

You received this notice because government regulations require that notification be sent to the last known owner of record.

Our records are based primarily on state registration and title data, which indicate that you are the current owner of this vehicle. If this is not the case, or if any of the information is not correct, please complete, sign and return the Information Change Card and we will then update our records. If you are a lessor of this vehicle, federal regulations require you to forward this notice to your lessee within ten days.

 

DO YOU STILL HAVE MORE QUESTIONS?

Should you have any questions about this recall, please contact your Acura dealer. Should you need additional assistance, you may contact American Honda’s Customer Support & Campaign Center at 1-888-234-2138. You may also visit www.recalls.acura.com to use our 24/7 virtual agent, Ask Us.

If you believe that American Honda or the dealer has failed or is unable to remedy the defect in your vehicle, without charge, within a reasonable period of time (60 days from the date you first contact the dealer for a repair appointment), you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE, Washington, DC 20590. Alternatively, you may call the NHTSA’s toll-free Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to http://www.safercar.gov.

We apologize for any inconvenience this recall may cause you. Sincerely,

 

American Honda Motor Co., Inc.

Acura Automobile Division

Campaign #P3W / Service Bulletin #19-011

P3W TLX


Marzo del 2019

Campaña de seguridad NHTSA 19V-060

 

CAMPAÑA DE SEGURIDAD IMPORTANTE

Esta notificación aplica a su vehículo: XXXXXXXXXXXXXXXX

 

Estimado <First Name Last Name>,

Esta notificación ha sido enviada a usted de acuerdo con el decreto de la oficina de Administración Nacional de Seguridad del Tráfico en las Carreteras (National Highway Traffic Safety Administration o NHTSA por sus siglas en inglés).

 

¿CUÁL ES EL MOTIVO DE ESTA NOTIFICACIÓN?

Acura ha determinado que existe un defecto el cual está relacionado con la seguridad del vehículo en algunos vehículos modelo TLX año modelo 2015–2019 equipados con un motor V6. Los combustibles que contienen alto contenido de sodio pueden contaminar ciertos componentes internos en la bomba de combustible y reducir el flujo de combustible al motor.

 

CONSECUENCIA DE SEGURIDAD

El flujo de combustible reducido hacia el motor en combinación con el funcionamiento del vehículo en condiciones de altas temperaturas puede restringir la aceleración del vehículo y/o causar que el motor se detenga, lo cual aumenta el riesgo de un choque.

 

CONSECUENCIA DE EMISIÓN

La luz indicadora de fallas (verificar el motor) puede iluminarse como un resultado de este defecto. Su vehículo puede fallar una inspección de emisiones local o estatal cuando tales pruebas sean requeridas bajo la ley estatal si usted no completa la reparación.

 

¿QUÉ HARÁ ACURA?

El concesionario actualizará el programa para la unidad de control del motor con una programación que elimina la contaminación de sodio en la bomba de combustible, dicha actualización se realizará de forma gratuita. El concesionario también realizará un diagnóstico utilizando la herramienta de diagnóstico en su vehículo y, si la herramienta de diagnóstico confirma que el motor se ha detenido previamente, la bomba de combustible se reemplazará de forma gratuita.

 

¿QUÉ DEBE HACER USTED?

Por favor comuníquese con cualquier concesionario Acura y haga una cita para la actualización del programa de su vehículo, el diagnóstico utilizando la herramienta de diagnóstico y si es necesario, el reemplazo de la bomba de combustible, de forma gratuita.  Una vez que programe una cita para su vehículo, le avisamos que el proceso de reprogramación podría tardar aproximadamente 30 minutos. Si la bomba de combustible necesita reemplazo, el proceso de reparación total (incluyendo la actualización del programa) puede tomar aproximadamente 1 hora. No obstante, su concesionario le puede ofrecer un mejor estimado del tiempo total de esta visita de servicio, ya que pudiera ser necesario que su vehículo esté disponible por un periodo más largo. ¡Si usted no es el único conductor de este vehículo, por favor informe a todos los conductores y pasajeros sobre esta información importante!

 

VERIFIQUE SI SU VEHÍCULO TIENE UNA CAMPAÑA DE SEGURIDAD PENDIENTE

Puede verificar la elegibilidad de su vehículo para que sea reparado bajo esta campaña de seguridad o bajo cualquier otra. Por favor visite la herramienta Acura Recall Lookup” en www.recalls.acura.com e ingrese su número de identificación del vehículo (VIN).

 

SOLAMENTE PROPIETARIOS EN CALIFORNIA

El DMV no renovará su registro del vehículo hasta que esta campaña de seguridad de emisiones haya sido completada.

Después de completar este procedimiento de reparación, su concesionario le entregará un certificado de Prueba de Corrección – Campaña de seguridad de emisiones del vehículo (Vehicle Emissions Recall – Proof of Correction). Por favor asegúrese que el concesionario complete y le otorgue el certificado. Mantenga el certificado para sus registros como prueba que la campaña de emisiones fue completada. Envíe el certificado para el DMV solamente si el DMV lo solicita.

 

GARANTÍA DE EMISIONES

A fin de garantizar su protección completa bajo las disposiciones con respecto a la garantía de emisiones, se recomienda que haga que su vehículo sea reparado tan pronto sea posible. De no hacerlo podría determinarse como una falta de mantenimiento adecuado.

 

INFORMACIÓN DEL PROPIETARIO

Usted recibió esta notificación porque las regulaciones gubernamentales requieren que esta notificación sea enviada al último propietario registrado. Nuestros registros están basados principalmente en los datos de título y registro en el estado, el cual indica que usted es el propietario actual de este vehículo. Si no es el caso o si la información no está correcta, por favor complete, firme y devuelva la tarjeta de Cambio de información anexa y nosotros actualizaremos nuestros registros. Si usted es el arrendador de este vehículo, las regulaciones federales requieren que usted envié una copia de esta notificación a su arrendatario en un lapso de diez días.

 

¿USTED TODAVÍA TIENE MÁS PREGUNTAS?

Si tiene preguntas acerca de esta campaña de seguridad, por favor comuníquese con su concesionario Acura.

En caso de necesitar asistencia adicional, usted puede comunicarse con el Centro de Apoyo al Cliente y Campañas de American Honda al 1-888-234-2138. Usted también puede visitar www.recalls.acura.com para usar nuestro agente virtual “Ask Us” las 24 horas/los 7 días a la semana.

Si usted cree que American Honda o el concesionario ha fallado o no le es posible reparar el defecto en su vehículo, sin cobro alguno, dentro de un período de tiempo razonable (60 días desde la fecha en que usted contactó por primera vez el concesionario para la cita de la reparación), usted puede enviar una queja a: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE, Washington, DC 20590. Alternativamente, usted también puede comunicarse con el número de llamada sin costo (Toll-free) Safety Hotline de NHTSA al 888-327-4236 (TTY 800-424-9153), o visitar la página web http://www.safercar.gov.

Le pedimos disculpas por cualquier inconveniente que esta campaña de seguridad pudiera causarle.

Atentamente,

American Honda Motor Co., Inc.

División Automotriz de Acura

Campaña #P3W / Boletín de Servicio #19-011

P3W TLX


11 Affected Products

Vehicles

MAKE MODEL YEAR
ACURA MDX 2016-2018
ACURA TLX 2015-2019
HONDA ACCORD 2015-2017

 


20 Associated Documents

Defect Notice 573 Report

RCLRPT-19V060-9010.PDF 222.944KB

RCLRPT-19V060-9010

 


DEFECT INFORMATION REPORT

RMISC-19V060-1671.pdf 83.908KB

RMISC-19V060-1671

 


Remedy Instructions and TSB

RCRIT-19V060-1975.pdf 609.726KB

RCRIT-19V060-1975

 


Remedy Instructions and TSB

RCRIT-19V060-8688.pdf 629.303KB

RCRIT-19V060-8688

 


Defect Notice 573 Report

RCLRPT-19V060-8514.PDF 222.944KB

RCLRPT-19V060-8514

 


Manufacturer Notices(to Dealers,etc) – 01 30 2019 Subject 2015-17 Accord Fuel Pump Failure Safety Recall

RCMN-19V060-4728.pdf 147.292KB

RCMN-19V060-4728

 


Recall Acknowledgement

RCAK-19V060-8813.pdf 300.269KB

RCAK-19V060-8813

 


Remedy Instructions and TSB

RCRIT-19V060-9640.pdf 625.16KB

RCRIT-19V060-9640

 


Manufacturer Notices(to Dealers,etc) – 01 30 2019 Subject 2015-19 TLX, 2016-18 MDX Fuel Pump Failure Safety Recall

RCMN-19V060-2661.pdf 146.878KB

RCMN-19V060-2661

 


Manufacturer Notices(to Dealers,etc) – 01 31 2019 Subject 2015-17 Accord Fuel Pump Ordering

RCMN-19V060-4304.pdf 105.303KB

RCMN-19V060-4304

 


Remedy Instructions and TSB

RCRIT-19V060-2834.pdf 613.637KB

RCRIT-19V060-2834

 


Manufacturer Notices(to Dealers,etc) – 01 31 2019 Subject 2015-19 TLX, 16-18 MDX Fuel Pump Ordering

RCMN-19V060-8346.pdf 106.362KB

RCMN-19V060-8346

 


Statement by American Honda Regarding Fuel Pump Recall: 2016-2018 Acura MDX, 2015-2019 Acura TLX V6 and 2015-2017 Honda Accord V6

RMISC-19V060-9492.pdf 106.295KB

RMISC-19V060-9492

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V060-6384.pdf 93.033KB

RCONL-19V060-6384

 


Remedy Instructions and TSB

RCRIT-19V060-9350.pdf 957.088KB

RCRIT-19V060-9350

 


Remedy Instructions and TSB

RCRIT-19V060-1902.pdf 1230.03KB

RCRIT-19V060-1902

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V060-3713.pdf 139.166KB

RCONL-19V060-3713

 


Recall Quarterly Report #1, 2019-1

RCLQRT-19V060-6114.PDF 211.166KB

RCLQRT-19V060-6114

 


Recall Quarterly Report #2, 2019-2

RCLQRT-19V060-6909.PDF 211.276KB

RCLQRT-19V060-6909

 


Recall Quarterly Report #3, 2019-3

RCLQRT-19V060-7493.PDF 211.366KB

RCLQRT-19V060-7493

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V060&docType=RCL

 


 

i-HDS Diagnostic Software and J2534 Reprogramming Software

https://honda.oemdtc.com/342/i-hds-diagnostic-software-and-j2534-reprogramming-software

 

Honda J2534 Pass-Thru User Guide

Honda J2534 Pass-Thru Software Download

Latest ECU Software

 

i-HDS Diagnostic Software and J2534 Reprogramming Software

American Honda Motor Co., Inc. ("Honda") offers the i-HDS (Honda Diagnostic System) software suite for the diagnosis and repair of electronic systems on Honda and Acura automobiles, and for the reprogramming of electronic control units (including, but not limited to, ECMs and PCMs). This software provides access to all Honda and Acura vehicle systems (access to the immobilizer security system requires a Security Professional level software subscription and Vehicle Security Professional [VSP] registration with NASTF). To use the i-HDS software, you need to purchase one of our convenient subscription options. In addition, you will need a pass-thru Vehicle Communication Device (VCI) that is compliant with SAE J2534-1 and J2534-2 in order to communicate with the vehicle

 

Vehicle Communication Interfaces (VCI)

The i-HDS software supports the use of a generic pass-thru VCI that is compliant with SAE J2534-1 and J2534-2. However, Honda recommends the Denso DST-i or the Bosch MVCI for use on Honda and Acura vehicles, as Honda has worked closely with these manufacturers to ensure their hardware and our software interact safely and within the J2534-1 and -2 specifications, for both diagnostics and reprogramming. If you choose to use a generic VCI, please carefully consider the customer and technical support options you will receive from your chosen device supplier. Honda does not provide technical or customer support for generic VCI devices.

The VCI Application Table below lists devices that either are approved and supported by Honda or are known to have completed and passed an independent, exhaustive validation program with our i-HDS software suite.

VCI Name Manufacturer Version Information Notes
Firmware J2534 API
DST-i DENSO 2.02.0002* 04.04 This is the current generation VCI used by Honda and Acura dealers. Honda routinely validates the functionality and provides customer support for this device.
DST-nano DENSO 2.02.0002* 04.04 This is the current generation VCI used by Honda Canada Inc. Honda and Acura dealers. Honda routinely validates the functionality and provides customer support for this device.
MVCI Bosch 3.01.60* 04.04 This is the previous generation VCI used by Honda and Acura dealers. Honda routinely validates the functionality and provides customer support for this device.
MongoosePro Honda  Drew Technologies 1.9.5** 04.04 This company has completed an independent i-HDS validation and claims it to function with the i-HDS software. Honda does not provide ongoing validation, nor customer support for this device.
d-briDGe Pro Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light Dearborn Group 3.303** 04.04 This company has completed an independent i-HDS validation and claims it to function with the i-HDS software. Honda does not provide ongoing validation, nor customer support for this device.

* These versions may have been superseded. Honda provides the latest supported versions to current i-HDS subscribers.
** Version used in validation program. See Terms and Conditions and Important Notice Regarding Reprogramming below for more details.

 

Reprogramming with the J2534 Rewrite Application in i-HDS

Included in the i-HDS software suite is a new reprogramming application called J2534 Rewrite. This application is made available to all subscribers of the i-HDS software suite and replaces the previous generation software, J2534 Honda Pass-thru Reprogramming Software.

This new application is compatible with generic VCIs that comply with SAE J2534. It must be used to reprogram any Honda/Acura vehicle equipped with ECUs that support reprogramming. Refer to the table below for legacy applicability for the programming of ECMs and PCMs. Though system dependent, late-model vehicles may be equipped with other ECUs that support reprogramming as well, e.g. ABS or VSA. J2534 Rewrite must be used to reprogram these control modules, as instructed in an applicable service bulletin.

As shown in this table, not all legacy Honda/Acura models are equipped with a reprogrammable ECM/PCM. Furthermore, all 2007 and later models not listed in the table are fully supported with this application.

Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light VSI J2534 ECU Reprogrammer & Diagnostic Adapter
Safety Recall: 2016-2018 Acura MDX & 2015-2019 TLX V6 Fuel Pump » small light MAXIFLASH PRO (ALT-MF2534)

 

DST-i Information:

MVCI Information:

 

techinfo.honda.com

 


 

Bestseller No. 1
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool Original for Autel MK908, MS908, MS908S, MK908P, MS908S Pro, MaxiSys Elite
  • 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘 !
  • 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
  • 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
  • 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.
  • 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
Bestseller No. 2
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool - Bluetooth
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 3
VXDIAG SVCI J2534 Diagnostic Interface Supports SAE J1850 Compatible for Ford Mazda Scan Tool
  • VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. And it can be used as a ELM327 device also, support most of ELM327 software.
  • High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the diagnosis smooth. And the programming function requires the original online account .(Not work for the Ford F serial cars, like F150,F250,F350,F450)
  • [Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed: works as ELM327 mode Released: works as J2534 mode
  • VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then install the original brand vehicle software,For example, Ford, Mazda.(Before install the software,pls turn off your antivirus software )
  • For software installation, please feel free to contact our online customer service.
Bestseller No. 4
Autel MaxiCom MK908P Scanner: 2022 Updated of MS908S Pro Same as MaxiSys Elite Elite II, Top J2534 Programming ECU Coding, Bi-Directional Tool with 36+ Service, Active Test, AutoAuth for FCA SGW
  • 🚗【Same as MaxiSys Elite, No IP Restriction】: Covering 99% of the vehicle models from 1996 to 2022. Based on the MS908S Pro, Autel MK908P diagnostic scan tool enjoys superior hardware configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English) Lifetime after-sales service and professional technology support have no difference from offline retail version. Feel free to message us with any problems.
  • 🚗【ECU Programming & Coding, Guru for Local Smith】: To broaden vehicle business and increase your revenue, the Autel scanner MK908P assigns advanced ECU programming and coding to 1) customize your car, 2) unfold the hidden features, 3) disable the annoying functions to improve car performance, but also reprogram the adaptive data to certain components after repairs or replacements. The specific operation varies by model.
  • 🚗【36+ Service Functions, Best for Repair Shops】: Designed for large-scale garages and equipped with 36+ repair functions, Autel MK908P covers 99% of cars in the market. This make it the most valuable scanner to serve as many cars as possible in your shop. The 36+ functions include Oil Reset, TPMS, ABS Bleeding, EPB, SAS, Injector Coding, BMS, Suspension, etc. Please be noted MK908P programming tool will always keep pace with newer functions and continuous upgrading, never out of date.
  • 🚗【High-end Online Functions, OE-level Auto Scanner】: MK908P diagnostic tool explores all the systems and scans hidden DTCs. For quickly locating the fault, active test sends commands directly to vehicle modules to perform specific tests on windows, sunroofs, wipers, relays, injectors, and actuators, etc. Newly launched online functions obtain the online data from the server like online account login service for VW, Audi, Skoda; online configuration for Renault; online coding for Porsche; etc.
  • 🚗【Top-end Configuration, Ultra-Fast Speed】: Same functions with MaxiSys Elite, but configured with 2G+64G memory Hexa-core processor, 10.1” screen, and 15000mAh battery to accelerate diagnostics and repair. 2022 MK908P diagnostic scanner offers more to expand the market and raise income for example power balance for Ford, Chrysler, GM; personalization for VW, Audi, Toyota; guided functions for VW, Audi, Skoda; etc.
Bestseller No. 5
BOSCH Automotive Tools MTECH2 Mastertech II J2534 VCI with Wired/Wireless Capability for OEM Reprogramming and Diagnostics on GM, Ford, FCA, Nissan/Infiniti, Honda/Acura, and Toyota/Lexus Vehicles
  • [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
  • [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
  • [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
  • [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
  • [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
Bestseller No. 6
Autel MaxiSys Pro MS908S Pro 2022 Newest Diagnostic Scan Tool with J2534 ECU Programming/ ECU Coding/ Adaption, Proven Solution for US, Bi-Directional Control, 36+ Services, Same as Elite/ MK908P
  • 👍【2022 Newest Updates: AutoAuth Access & Cloud Service】Two long-awaited features for old customers!✅(Since June 2022)Autel original MS908S Pro scanner supports "AutoAuth" gateway access on 2018 and newer Fiat Chrysler vehicles, such as Chrysler, Dodge, Jeep, etc, still growing. ✅(Support Cloud Report Management, you can upload diagnostic reports to Autel Cloud and share reports with your customers through QR Code/email/text message easily, and they can view the reports anytime.
  • 👍【A Must for Garage and Workshop】If you need to program Benz/BMW, Autel MS908S Pro scanner is definitely an expert, this is what it does best! MS908S Pro is a mature product that has been tested and approved by workshops across US. Besides ECU Programming for Benz/BWM, MS908S Pro can perform ECU Coding, Active Tests, 36+ Services, All System Diagnostic, FCA “AutoAuth” Access, etc.🚦📢👉 Note: MS908S Pro is for North & South America only and supports English only.
  • 👍【One-Stop ECU Programming for BENZ/ BMW】Coming with J2534 ECU programming device, Autel MS908S Pro is competent for ECU programming and ECU coding/ adaption. It can program blank ECU, adapt existed ECU, match components, reflash second-hand ECU, unlock hidden functions, etc. In order to reduce operational burden, MaxiSys MS908S Pro provides one-stop operation to meet the needs of different experienced technicians, no worries about missing some steps and causing failure.
  • 👍【Advanced ECU Coding, Customize your Car】Automotive diagnostic scan tool MS908S Pro features Advanced ECU Coding, so you can use it to customize your car as needed by disabling some unneeded OEM settings (like auto start-stop, chimes, etc), or activating the hidden features pre-programmed to car computer to get high-end functions (like US-style daytime light, auto door look at a particular speed, etc).👉Compatible with BWM, VW, Audi, Skoda, etc.
  • 👍【OE-level Diagnostic Capability & Guided Function】Auto diagnostic tool MS908S Pro, with J2354 device for BT communication up to 210ft/70m working range, can access all available vehicle modules such as PCM, ECM, TCM, BCM, SCCM, etc, to read codes, clear codes, view live data, perform active tests, etc. Guided functions provides step by step specific guidances to complete some complex service operations. 👉Compatible with VW, Audi, Skoda, Seat, etc.
Bestseller No. 7
Mongoose-Plus Ford / Lincoln / Mercury J2534 OEM Vehicle Interface Cable - OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
  • Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 8
THINKCAR Bi-Directional Scan Tool THINKTOOL PD8, Car Diagnostic Scanner, 2022 Newest OEM All System & 34 Resets Car Diagnostic Scanner, AutoAuth for FCA SGW, ECU Coding, IMMO Key Programming
  • 🎁【Free OBD2 Scanner】: Just click "Extra Savings" under price and add both to your cart to get a Code Reader. Limited quantity. First come, first served. 🎁【Great Gift Idea】: A top present choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Get THINKTOOL PD8 obd2 scanner and give your lover a surprise!
  • 👍【 ✅2022 Model ✅Faster, More Popular, Wider Regional vehicle coverage than Other Similar Models】THINKCAR THINKTOOL PD8 scan tool adds loads of OE-Level features as ➤【AutoAuth for FCA SGW】which makes PD8 works with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017.➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz ➤Modification for BMW ➤Offline Coding ➤Customization ➤Personalization, for worldwide vehicles, and keep growing.
  • 🚗【ECU Coding + OE-Level Full Diagnostics】PD8 obd2 scanner allows you to deeply access and diagnose all the electrical systems on the vehicles such as ABS/ECM/SRS/IC/TCM/BCM/EPS/EPB/TPMS/AC/Fuel System, Light System, Wiper System, etc. And this Newest auto diagnostic scan tool features with advanced ECU coding allows you to access the ECU of a vehicle to re-flash vehicles control modules, and customize the vehicle as need, optimize the specific performance of vehicles.
  • 🚗【Bi-Directional Control / Active Tests + 34 Reset Function】OBD2 diagnostic scan tool with its advanced 34 hot reset service including Oil/EPB/DPF/SAS/TPMS/IMMO/ABS/SRS/Transmission/Battery service, Odometer(ODO), Injector Coding, Throttle Matching, etc.Full-featured bi-directional control can actuate solenoids and actuators for active testing, send commands to all systems/components to test working status without using the vehicle controls.
  • 🚗【2022 Version THINKCAR THINKTOOL PD8】 THINKTOOL PD8 has more advanced functions: Guiding Functions(compatible with VW,AUDI,SKODA,SEAT), Variant Coding, PD8 has wider vehicle coverage, supports AutoAuth for FCA SGW, which makes V compatible with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017. Supprt Service online : 5 years waranty 7*24Hrs online.
Bestseller No. 9
LAUNCH X431 PRO5 Scan Tool: 2022 J2534 Reprogramming Tool Upgraded of X431 V+, ECU Online Coding with 50+ Services, Bi-Directional Diagnostic Scanner, with SmartBox 3.0 CANFD & DOIP, 2 Years Update
  • 👍【Why Choose LAUNCH X431 PRO5】It is the original LAUNCH X431 scan tool, not a copy machine, also the 2022 upgraded version of CRP909X, PROS V1.0, X431 PRO3 and V+. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD V; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online functions directly connect to OEM server; 4) support 150+ brands Vehicles from 1996-2022.
  • 👍【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new J2534/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for BMW, Benz, Ford, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 👍【LAUNCH X431 PRO5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD V. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year free update while other brands generally 1 year.
  • 👍【Active Test + Local-smith Level ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 minutes. This LAUNCH scanner even develops all practical functions needed by all technicians: 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
  • 👍【All System Diagnostics for 99% Vehicle Coverage] Serve for 150+ American, Asian, European brands, and cover 99% of vehicle models worldwide. This LAUNCH diagnostic scan tool can operate complete full-function diagnostics to all on-board systems to troubleshoot and repair all vehicle problems, including Engine, Transmission, Airbag, ABS, ESP, TPMS, Immobilizer, Gateway, Steering, Radio, Air Conditioning, etc.
Bestseller No. 10

Last update on 2022-08-10 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 

Leave a Comment

Share to...