Safety Recall – Drive Shaft May Corrode and Fail – 2007-2013 Honda Fit & 2012 Civic Hybrid

December 10, 2020 NHTSA CAMPAIGN NUMBER: 20V770000

Drive Shaft May Corrode and Fail

A broken drive shaft may cause a sudden loss of drive power. The vehicle could also roll away if the parking brake has not been applied before the vehicle has been exited. Either condition can increase the risk of a crash or injury.

 

NHTSA Campaign Number: 20V770

Manufacturer Honda (American Honda Motor Co.)

Components POWER TRAIN

Potential Number of Units Affected 210,000

 

Summary

Honda (American Honda Motor Co.) is recalling certain 2013-2015 Acura ILX, 2013 Acura ILX Hybrid, 2012 Honda Civic Hybrid, and 2007-2008 Honda Fit vehicles with a manual transmission and 2009-2014 Honda Fit vehicles originally sold, or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The drive shafts’ protective coating may not have been applied properly during manufacturing, making it more susceptible to damage from road salt, or other contaminants, and potentially cause it to break.

 

Remedy

Honda will notify owners, and dealers will inspect the drive shafts, replacing either the left or right drive shaft, if necessary, free of charge. Owners were notified of the safety risk with an interim letter mailed February 2, 2021. A second letter will be sent once the remedy is available. Owners may contact Honda customer service at 1-888-234-2138. Honda’s numbers for this recall are P9M, PAV, BAY, TAX, CA0, and MAZ.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Honda has a Recall

 


Safety Recall: 2007-2013 Honda Fit & 2012 Civic Hybrid Driveshaft Failure

 

Safety Recall – Drive Shaft May Corrode and Fail – 2007-2013 Honda Fit & 2012 Civic Hybrid

 


Safety Recall: 2009-2013 Honda Fit Driveshaft Inspection

 

Safety Recall – Drive Shaft May Corrode and Fail – 2007-2013 Honda Fit & 2012 Civic Hybrid

 


Safety Recall: 2007-2008 Honda Fit Driveshaft Inspection

 

Safety Recall – Drive Shaft May Corrode and Fail – 2007-2013 Honda Fit & 2012 Civic Hybrid

 


Safety Recall: 2012 Honda Civic Hybrid Driveshaft Inspection

 

Safety Recall – Drive Shaft May Corrode and Fail – 2007-2013 Honda Fit & 2012 Civic Hybrid

 


For Immediate Release

 

Statement by American Honda Regarding Left and Right Front Drive Shaft Recalls 

 

  • Approximately 430,000 Acura and Honda vehicles are included in separate left and right front drive shaft recalls in 22 salt belt states of the U.S., plus Washington D.C.
  • Drive shafts will be inspected and, if needed, replaced, for free
  • No reported crashes or injuries related to this issue

 

TORRANCE, Calif. – Dec. 15, 2020 – American Honda will conduct two voluntarily recalls affecting approximately 430,000 Acura and Honda vehicles in 22 salt belt states and the District of Columbia in the United States to inspect and, if needed, replace their left and/or right front drive shafts, for free. Both recalls are in response to possible breakage of the drive shafts due to corrosion caused by a combination of potentially damaged or incorrectly cured protective coatings during driveshaft assembly and longterm exposure to road salt primarily used in the northeastern United States. If a drive shaft breaks, it may cause a loss of motive power or allow the vehicle to roll while in the parking gear if the parking brake is not activated, both increasing the risk of a crash or injury. No crashes or injuries have been reported in relation to either condition.  The recalls will apply to vehicles that were originally sold or ever registered in these 22 states and the District of Columbia, where road salt is regularly used in the winter: CT, DC, DE, IL, IN, IA, KY, ME, MD, MA, MI, MN, MO, NH, NJ, NY, OH, PA, RI, VT, VI, WV, WI.

 

At the time of this announcement, repair parts are not available for all vehicles involved in these recalls. Therefore, initial mailed notifications, beginning in early-Feb 2021 may inform certain vehicle owners of the recall and advise them to await later notification before seeking inspection and repair. American Honda encourages each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification that an inspection and potential repair is available for their vehicle. Owners can also determine if their specific vehicles are included in the recall and will later require inspection by visiting www.recalls.honda.com or www.recalls.acura.com or by calling (888) 234-2138.

 

Models included in these recalls: (certain specific vehicles only)

2012 Honda Civic Hybrid
2007-2014 Honda Fit
2013-2015 Acura ILX
2013 Acura ILX Hybrid
2013-2015 Honda Accord (separate recall from models listed above)

 

# # #

 

American Honda Motor Co., Inc. ● 1919 Torrance Blvd. ● Torrance, California 90501-2746 ● Phone (310) 783-3170 ● Fax (310) 783-3622
Media Web Site: www.hondanews.com  Consumer Web Site: www.honda.com

 


Excerpt from NHTSA acknowledgement letter for our driveshaft recall:

Please submit what will be Honda’s procedure for [#1] addressing corrosion-related driveshaft failure in vehicles outside of the included states and [#2] the procedure for addressing corrosion related driveshaft failure in vehicles that previously were inspected and deemed to not need a driveshaft replacement.

 

#1

Honda is implementing the following process to address out-of-scope vehicles.  If a customer contacts a dealership and believes their vehicle should be included in the driveshaft recall campaign due to information not available to Honda (either at the time of recall announcement or thereafter), the dealer will contact their Honda District Parts and Service Manager (DPSM).  The customer will also be advised to contact Honda’s Automobile Customer Service (ACS) to discuss their concerns and an internal review will be conducted to determine if the vehicle should be qualified for the recall repair.  If the vehicle is determined to qualify, an owner recall notice letter will be mailed to the customer.  The VIN will also be loaded into the system and a revised DIR updating total affected vehicles and manufacturer production range (if applicable) will be submitted to the NHTSA portal.

 

Honda’s recall service bulletins will be updated with the note: “The affected VIN population for this recall was determined based on information available to Honda at the time the recall was announced. If a customer believes their vehicle should be included in the campaign due to information not available to Honda (either at the time of recall announcement or thereafter), contact your DPSM and have the customer contact American Honda with their concern. For any questions or concerns that customers may have, you may direct them to contact American Honda’s Customer Support & Campaign Center at 888-234-2138.”  The service bulletins also include a video to assist technicians with the recall repair inspection and DPSMs have met with dealers to review the repair inspection procedure.

 

#2.

For customer vehicles that had the remedy process completed, Honda believes these vehicle’s parts will extend the vehicle’s life even with usage in salt belt states.

When the drive shaft is replaced, the new parts have been estimated to extend the vehicle life by more than 9.0 years (which means more than 15 years from vehicle first sales) as shown in the following table.

Table 1.  Remaining vehicle life prediction after replacement

 

Even in cases when Honda judges as “No need for replacement” or out-of-scope due to registration outside of salt belt states, Honda will continue to take care the customer concerns indicated in #1.

 

Also, Honda estimates the recurrence risk of this issue to be low as shown in the following calculation.

 

1) D/Shaft NG ratio (estimated from market investigation) 76.19%  =  Non-replacement ratio: 23.81%

2) Likelihood of change in  registration to SB states from Dec 2020 until Dec 2026:   5.36%  (Calculated based on registration data of 2013-2020 Accord)

3) Occurrence ratio of D/shaft breakage caused by manufacturing failure: 0.08%

 

Total occurrence ratio : 23.81% x 5.36% x 0.08%   =0.001%

 


Defect Information Report

 

Name of manufacturer:

Honda Automobile China Co., Ltd.
Honda Manufacturing of Indiana, LLC
Honda Motor Co., Ltd.

 

Manufacturer’s agent:

Jeff Chang
American Honda Motor Co., Inc.
1919 Torrance Blvd.
Torrance, CA 90501-2746

 

Identification of potentially affected vehicles:

Make/Model Model Year Dates of Manufacture Number of Vehicles
Acura ILX 2013 TBD TBD
Acura ILX 2014 TBD TBD
Acura ILX 2015 TBD TBD
Acura ILX Hybrid 2013 TBD TBD
Honda Civic Hybrid 2012 TBD TBD
Honda Fit 2007 TBD TBD
Honda Fit 2008 TBD TBD
Honda Fit 2009 TBD TBD
Honda Fit 2010 TBD TBD
Honda Fit 2011 TBD TBD
Honda Fit 2012 TBD TBD
Honda Fit 2013 TBD TBD
Honda Fit 2014 TBD TBD

 

Description of the basis for the determination of the recall population:

The recall population was determined based on manufacturing, sales, and vehicle registration records. The manufacturing range reflects all possible vehicles that could potentially experience the problem.

 

Description of how the vehicles being recalled differ from similar vehicles not included in the recall:

The recall is specific to vehicles sold or ever registered in the salt-belt region (Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, Washington, D.C., West Virginia, and Wisconsin). There have been no reports of occurrences outside the salt-belt region.

Additional model-specific information as follows:

Acura ILX / ILX Hybrid Honda Civic Honda Fit
The 2014 – 2015 model year hybrid vehicles are not included in the recall as the drive shafts installed in these vehicles were from a different supplier. The non-hybrid vehicles are not included in the recall as the vehicle layout protects the drive shaft from road debris. Only 2007 – 2008 model year vehicles with an automatic transmission are included in the recall. Vehicles with a manual transmission are installed with drive shafts of a different design.

All 2009 – 2014 model year vehicles are included in the recall regardless of transmission type.

 

Identification of affected component:         

Component: Drive Shaft Assy., R. Drive Shaft Assy., L.

Part No.: 2013-15 Acura ILX 44305-TX6-305 44306-TX6-315
2013 Acura ILX Hybrid 44305-TR2-305 44306-TR2-305
2012 Civic Hybrid
2007-08 Honda Fit (AT) 44305-SLN-305

44305-SLN-L00

44306-SLN-305

44306-SLN-L00

2009-14 Honda Fit (AT) 44305-TK6-305 44306-TK6-305
2009-14 Honda Fit (MT) 44305-TK6-316 N/A  (different design)

 

Country of Origin: Japan

Manufacturer: Honda Motor Co., Ltd.

 

Total number of potentially affected vehicles: TBD

 

Percentage of affected vehicles that contain the defect: 1%

 

Defect description:

The drive shafts’ protective coating application process may not allow the protective coating to properly adhere to the drive shaft installed in affected vehicles. A drive shaft with an improperly adhered protective coating is more susceptible to damage from road debris. In salt-belt states where de-icing agents are used to maintain the roadway, the de-icing agents could accumulate on the damaged areas of the drive shaft and corrode it. A corroded drive shaft could break under high torque application, and the engine will no longer propel the vehicle in any gear. The vehicle may also roll away if the parking brake has not been set (even if the gear selector had been placed in the Park position for vehicles with automatic/continuously variable transmission). Both conditions increase the risk of a crash or injury without prior warning.

 

Chronology:

September to November 2017

Honda received the first report of a broken drive shaft in an Acura ILX and launched an investigation.

 

February 2018

Honda identified that during drive shaft assembly, certain drive shafts were allowed to cool to room temperature due to equipment stoppage on the assembly line or were taken off-line for repairs. A running change was implemented to ensure all drive shafts remained at the specified temperature throughout the assembly process.

 

September to October 2018

Honda received another report of a broken drive shaft, which was the first report involving a Honda Fit. Honda continued its investigation.

 

July to December 2019

The investigation was expanded to include global support. Since the suspect population of vehicles were no longer covered under warranty, a parts collection activity was launched.

 

April to October 2020

Data from the parts collection activity was analyzed to understand the factors resulting in a broken drive shaft and the expected longevity of in-market parts. The analysis concluded that the broken drive shafts were allowed to cool to a temperature below specification prior to application of the protective coating. The reduced temperature decreased the protective coating’s adhesion, increasing the likelihood of damage and corrosion. Occurrences were also limited to drive shafts utilizing a shear-type dynamic damper, which are more susceptible to corrosion from de-icing agents.

 

December 3, 2020

Honda determined that a defect related to motor vehicle safety existed and decided to conduct a safety recall.

 

As of November 24, 2020, Honda has received 152 warranty claims, 10 field reports, and no reports of crashes or injuries related to this issue.

 

Program for remedying the defect:

Depending on the parts availability, registered owners of some affected vehicles will be contacted by mail and asked to take their vehicle to an authorized Acura or Honda dealer. The dealer will inspect both left and right drive shafts for corrosion-related protective coating deformities near the drive shaft’s dynamic damper. If there are deformities near the dynamic damper (40mm for Honda Civic Hybrid and Fit, 50mm for Acura ILX and ILX Hybrid), the drive shaft will be replaced for free. Drives hafts that do not meet the 40mm/50mm requirement will not be replaced as it is estimated the drive shafts will not break for the remaining expected life of the vehicle.

Registered owners of affected vehicles that have limited parts availability will be notified in an interim notification that the parts necessary to repair their vehicles are currently unavailable.  Honda will send a second notification when parts become available, and the dealer will inspect/repair the vehicles for free.

Owners who have paid to have these repairs completed at their own expense will be eligible for reimbursement, in accord with the recall reimbursement plan on file with NHTSA.

 

The estimated date to start notification to dealers: December 11, 2020

The estimated date to start notifications to owners:   February 1, 2021

 

Representative copies of all notices, bulletins and other communications:

A copy of the dealer service bulletin, the final customer notification letter, and other dealer communications will be submitted to your office as soon as possible.

A draft of the owner notification letter will be submitted to your office as soon as possible.

 

Manufacturer’s campaign number:

E9B:  Acura ILX and ILX Hybrid (placeholder)

A9A:  Honda Civic Hybrid and Fit (placeholder)

 


13 Affected Products

Vehicles

MAKE MODEL YEAR
ACURA ILX 2013-2015
ACURA ILX HYBRID 2013
HONDA CIVIC HYBRID 2012
HONDA FIT 2007-2014

 


59 Associated Documents

Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2009-2013 Fit (A/T models) Driveshaft Failure

RCMN-20V770-4179.pdf 149.679KB

RCMN-20V770-4179

 


Remedy Instructions and TSB

RCRIT-20V770-7486.pdf 1869.446KB

RCRIT-20V770-7486

 


Remedy Instructions and TSB

RCRIT-20V770-9706.pdf 2059.878KB

RCRIT-20V770-9706

 


Miscellaneous Document – Part 573, Amended Defect Information Report

RMISC-20V770-9649.pdf 149.749KB

RMISC-20V770-9649

 


Miscellaneous Document – Media Statement

RMISC-20V770-5811.pdf 109.831KB

RMISC-20V770-5811

 


Recall 573 Report – Amendment 3

RCLRPT-20V770-1866.PDF 227.922KB

RCLRPT-20V770-1866

 


ISSUED Owner Notification Letter(Part 577)- 2013 ILX Hybrid

RCONL-20V770-0628.pdf 52.791KB

RCONL-20V770-0628

 


ISSUED Owner Notification Letter(Part 577)- 2012 Civic Hybrid

RCONL-20V770-9705.pdf 47.8KB

RCONL-20V770-9705

 


ISSUED Owner Notification Letter(Part 577)- 2009-13 Fit MT

RCONL-20V770-0732.pdf 47.718KB

RCONL-20V770-0732

 


Remedy Instructions and TSB

RCRIT-20V770-9419.pdf 1124.077KB

RCRIT-20V770-9419

 


Manufacturer Notices(to Dealers,etc)- UPDATE-Stop Sale/Safety Recall: 2013-2015 Accord, 2012 Civic Hybrid, 2007-2013 Fit Driveshaft Failure

RCMN-20V770-2206.pdf 188.31KB

RCMN-20V770-2206

 


Remedy Instructions and TSB

RCRIT-20V770-5891.pdf 1646.319KB

RCRIT-20V770-5891

 


Remedy Instructions and TSB

RCRIT-20V770-2135.pdf 637.948KB

RCRIT-20V770-2135

 


Remedy Instructions and TSB

RCRIT-20V770-6190.pdf 1643.445KB

RCRIT-20V770-6190

 


Miscellaneous Document – NHTSA Recall No. 20V-770 Part 573, Defect Information Report

RMISC-20V770-4771.pdf 155.379KB

RMISC-20V770-4771

 


Manufacturer Notices(to Dealers,etc)- Part Availability- Safety Recall: 09-13 Fit (A/T models) Driveshaft Failure

RCMN-20V770-0453.pdf 91.651KB

RCMN-20V770-0453

 


Remedy Instructions and TSB

RCRIT-20V770-6541.pdf 2382.529KB

RCRIT-20V770-6541

 


Remedy Instructions and TSB

RCRIT-20V770-3935.pdf 27.555KB

RCRIT-20V770-3935

 


Miscellaneous Document – Part 573, Defect Information Report

RMISC-20V770-2983.pdf 371.836KB

RMISC-20V770-2983

 


Defect Notice 573 Report

RCLRPT-20V770-5221.PDF 228.275KB

RCLRPT-20V770-5221

 


Manufacturer Notices(to Dealers,etc) – Stop Sale/Safety Recall: 2013-2015 Accord, 2012 Civic Hybrid, 2007-2013 Fit Driveshaft Failure

RCMN-20V770-3726.pdf 196.428KB

RCMN-20V770-3726

 


Recall Acknowledgement

RCAK-20V770-5066.pdf 636.33KB

RCAK-20V770-5066

 


Remedy Instructions and TSB

RCRIT-20V770-4635.pdf 1865.835KB

RCRIT-20V770-4635

 


Manufacturer Notices(to Dealers,etc) – Stop Sale/Safety Recall: 2013-2015 ILX and 2013 ILX Hybrid Driveshaft Failure

RCMN-20V770-1945.pdf 193.553KB

RCMN-20V770-1945

 


Remedy Instructions and TSB

RCRIT-20V770-5597.pdf 37.621KB

RCRIT-20V770-5597

 


Recall 573 Report – Amendment 1

RCLRPT-20V770-6416.PDF 228.392KB

RCLRPT-20V770-6416

 


Remedy Instructions and TSB

RCRIT-20V770-5414.pdf 27.12KB

RCRIT-20V770-5414

 


Remedy Instructions and TSB

RCRIT-20V770-9377.pdf 37.533KB

RCRIT-20V770-9377

 


Recall Quarterly Report #1, 2021-1

RCLQRT-20V770-0979.PDF 211.168KB

RCLQRT-20V770-0979

 


ISSUED Owner Notification Letter(Part 577)- 2007-08 Fit AT

RCONL-20V770-4029.pdf 47.791KB

RCONL-20V770-4029

 


ISSUED Owner Notification Letter(Part 577)- 2009-13 Fit – automatic transmission

RCONL-20V770-0108.pdf 47.676KB

RCONL-20V770-0108

 


Recall 573 Report – Amendment 2

RCLRPT-20V770-8663.PDF 227.92KB

RCLRPT-20V770-8663

 


Remedy Instructions and TSB

RCRIT-20V770-3962.pdf 27.678KB

RCRIT-20V770-3962

 


Remedy Instructions and TSB

RCRIT-20V770-7904.pdf 27.422KB

RCRIT-20V770-7904

 


Remedy Instructions and TSB

RCRIT-20V770-2233.pdf 37.847KB

RCRIT-20V770-2233

 


Remedy Instructions and TSB

RCRIT-20V770-9642.pdf 1644.268KB

RCRIT-20V770-9642

 


Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2007-2008 Fit (A/T models) Driveshaft Failure

RCMN-20V770-9789.pdf 141.404KB

RCMN-20V770-9789

 


Miscellaneous Document – Driveshaft transient vehicle Honda response 2-01-2021

RMISC-20V770-0188.pdf 119.874KB

RMISC-20V770-0188

 


Remedy Instructions and TSB

RCRIT-20V770-7021.pdf 636.69KB

RCRIT-20V770-7021

 


Remedy Instructions and TSB

RCRIT-20V770-0754.pdf 1645.451KB

RCRIT-20V770-0754

 


Manufacturer Notices(to Dealers,etc)- Acura – UPDATE-Stop Sale/Safety Recall: 2013-2015 ILX and 2013 ILX Hybrid Driveshaft Failure

RCMN-20V770-0190.pdf 141.654KB

RCMN-20V770-0190

 


Manufacturer Notices(to Dealers,etc)- UPDATE-Stop Sale/Safety Recall: 2013-2015 Accord, 2012 Civic Hybrid, 2007-2013 Fit Driveshaft Failure

RCMN-20V770-9216.pdf 144.187KB

RCMN-20V770-9216

 


Manufacturer Notices(to Dealers,etc)- Stop Sale/Safety Recall: 2013-2015 Accord, 2012 Civic Hybrid, 2007-2013 Fit Driveshaft Failure

RCMN-20V770-7902.pdf 102.431KB

RCMN-20V770-7902

 


ISSUED Interim Owner Notification Letter(Part 577)

RIONL-20V770-9531.pdf 45.593KB

RIONL-20V770-9531

 


Manufacturer Notices(to Dealers,etc)- Stop Sale/Safety Recall: 2013-2015 ILX and 2013 ILX Hybrid Driveshaft Failure

RCMN-20V770-9003.pdf 102.408KB

RCMN-20V770-9003

 


ISSUED Interim Owner Notification Letter(Part 577)- Acura

RIONL-20V770-1977.pdf 46.956KB

RIONL-20V770-1977

 


Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2012 Civic Hybrid Driveshaft Failure

RCMN-20V770-9717.pdf 139.957KB

RCMN-20V770-9717

 


ISSUED Owner Notification Letter(Part 577)- 2013-15 Acura ILX

RCONL-20V770-3408.pdf 52.349KB

RCONL-20V770-3408

 


Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2013 ILX Hybrid Driveshaft Failure

RCMN-20V770-2740.pdf 140.599KB

RCMN-20V770-2740

 


Remedy Instructions and TSB

RCRIT-20V770-6181.pdf 1694.125KB

RCRIT-20V770-6181

 


Remedy Instructions and TSB

RCRIT-20V770-4123.pdf 1913.595KB

RCRIT-20V770-4123

 


Manufacturer Notices(to Dealers,etc)- 2009-13 and 2007-08 Fit Driveshaft Inspection – Parts Return Instructions

RCMN-20V770-7167.pdf 37.98KB

RCMN-20V770-7167

 


Remedy Instructions and TSB

RCRIT-20V770-4861.pdf 1176.469KB

RCRIT-20V770-4861

 


Remedy Instructions and TSB

RCRIT-20V770-7967.pdf 2538.905KB

RCRIT-20V770-7967

 


Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2009-2013 Fit (M/T Model) Driveshaft Failure

RCMN-20V770-9537.pdf 141.824KB

RCMN-20V770-9537

 


Manufacturer Notices(to Dealers,etc)- UPDATE Stop Sale/Safety Recall: 2013-2015 ILX Driveshaft Failure

RCMN-20V770-7975.pdf 140.036KB

RCMN-20V770-7975

 


Recall 573 Report – Amendment 4

RCLRPT-20V770-7512.PDF 227.925KB

RCLRPT-20V770-7512

 


Recall 573 Report – Amendment 5

RCLRPT-20V770-5414.PDF 227.922KB

RCLRPT-20V770-5414

 


Recall Quarterly Report #2, 2021-2

RCLQRT-20V770-2845.PDF 211.279KB

RCLQRT-20V770-2845

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V770&docType=RCL

 


 

SaleBestseller No. 1
ABN Axle & Front Wheel Hub Puller – Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler
  • EASY BRAKE & BEARING REPAIR: The ABN Axle Remover & Front Wheel Puller Hub Grappler Tool makes for easy brake and bearing maintenance
  • WORKS ON YOUR VEHICLE: Compatible fit on domestic and import vehicles with independent front wheel suspension; Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs
  • VARIOUS APPLICATIONS: Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles
  • BUILT TO LAST: Heated pressure screw holds up to tough use; Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion
  • PERFECT SIZE: Yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications
Bestseller No. 2
Kommen Tools Drive Shaft Nut Remover and Installer Tool Set for Bimmer
  • Used to remove/install final drive propeller shaft nut.
  • Kit includes: 335 040, 335 050, 335 060, 335 080, 230 020.
Bestseller No. 3
Streetside Tools SST-1031-A - Chrysler - Shift Selector Shaft Seal Remover Installer Transmission Tool
  • Provides the easy removal and installation of the manual shaft (shift lever) seal.
  • Draining of the transmission fluid is not required.
  • The whole process takes just a few minutes.
  • For use on these Transmissions: 727 (36RH) (37RH), 904, 46RE / RH, 47RE / RH, 48RE / RH
Bestseller No. 4
Qiilu CV Ball Joint Puller Fully Adjustable Propshaft Separator Removal Tool Universal for Car Propshaft Separator Ball Joint Puller Propshaft Splitter Ball Joint Remover CV Joint Removal Drive Shaft
  • Rebuild your car --- CV Puller is a drive shaft puller and CV joint remover, allowing you to press the clamp on the drive shaft bridge shoe and rebuild the front half shaft.
  • Rebuild your car --- CV Puller is a drive shaft puller and CV joint remover, allowing you to press the clamp on the drive shaft bridge shoe and rebuild the front half shaft.
  • Universal --- There are 8 holes by both side of the puller propshaft splitter ball joint , multiple holes can be adjusted for According to different lengths of the joint components. In order to adapt to the joint components of different lengths on most cars; this CV ball universal joint puller can be adjusted to suit the most cars.
  • Note --- Hands-free operation allows you to easily release the circlip. Reduce the risk of damage to joints, transmissions or other parts; the collar opening can accommodate the shaft and allow the shaft to pass through (measure your application to ensure accurate assembly)
  • High quality materials --- The puller propshaft splitter ball joint is made of high-quality galvanized metal iron materials, strong and durable. The design is reasonable, saving time and effort, and will not damage the car.
Bestseller No. 5
Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide honda.oemdtc.com/product/k-B002BYJCRU/US/hondaoemdtc-20">hammer and the VC join fork is made of heavy duty steel, durable and not easy to break
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use
  • Combinnation Kit: This kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry, and we offer 12 months warranty, we will refund or replace, if the tool have any quality problem
Bestseller No. 6
A-Premium Rear Complete Driveshaft Drive Shaft Prop Shaft Assembly Compatible with Nissan Rogue 2008-2015 2.5L AWD
  • 【Vehicle Fitment】Compatible with Nissan Rogue 2011-2015(AWD), Rogue 2010(4WD/AWD), Rogue 2008-2009(AWD)---Rear; 1st Digit of VIN is J
  • 【Reference Number】37000JM100, 37000JM10A, 37000JM13A, 37000JM14A, SK946236, 65-6000, 656000, 946-236, 946236
  • 【Product Description】Length: 81.125 inch; Position: Rear
  • 【Directly Fit】This drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee; With being sturdy and brand-new, this drive shaft is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile.
Bestseller No. 7
Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints
  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles)
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Bestseller No. 8
12Pack ShareGoo Hard Steel M3x12MM Driveshafts Screw Pins Compatible with Axial SCX10 90046 Traxxas TRX-4 D90 Tamiya CC01 1/10 RC Crawler Car
  • The M3x12mm screw pins compatible with Axial SCX10 90046 Traxxas TRX-4 D90 Tamiya CC01 1/10 rc crawler car
  • Made of hard steel,durable in use.
  • Size:M3*12mm.if need other size screw pins,you can find it from our store.
  • Universal screw pins,please kindly check the size before place the order.
  • Pack of 12.Great to replace the old or sliding screw.
Bestseller No. 9
ARES 12020-2-Piece Axle Popper Kit - Includes Fork and Shim - for Use on Front Wheel Drive Vehicles - Break Half Shafts Loose from Transaxle
  • ITEM SPECIFICATIONS: This 2-Piece Axle Popper Set includes a 14-inch fork and a shim for quicker, easier, and safer work on front wheel drive vehicles when you need to break half shafts loose from the transaxle. The fork opening measures 1 7/8 inches. Note: This kit is not suitable for use on all vehicles. Check your vehicle specs to ensure proper fit.
  • DESIGN CONSIDERATIONS: The two piece design of this kit means that users have multiple options for the safest and most efficient possible use. Strike the axle popper wedge or use it as a prybar to release the half shaft, and when you need something to fill the gap between the half shaft and transaxle, the included shim is the perfect tool for the job. The forked ends of these tools apply even pressure to both sides of the shaft you're working on for safer use, so it's easy to get the job done.
  • APPLICATIONS: Whether you're a diy-er working out of your own home or a professional in a transmission shop, garage, or tire or body shop, this kit will allow you to break half shafts loose from the transaxle on front wheel drive vehicles quickly, easily, and safely thanks to the forked design's even pressure application.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Axle Popper Kit, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Bestseller No. 10
Bonbo 12020-2 Piece Axle Popper Kit Inner CV Axle Removal Tool Set Fit for Front Wheel Drive Vehicles, Remove Most Vehicles’ Half-Shaft Drive Axles & Fix Damaged CV Joints(2 PCS)
  • 【Easy disassembly of CV axle joint】Using the Axle Popper Forks Ball Joint Press Kit, you can quickly and easily loosen the half-axle wheeled vehicle from the front drive axle without damaging the axle's complex sliding hammer puller kit and pry bar.
  • 【Suitable for your needs】The fork-shaped end allows you to apply uniform pressure on both sides of the half shaft to ensure a safe release different from the pry bar and the sliding hammer; the two-piece CV shaft ejection tool kit ensures that it is suitable for most FWD vehicles . The solid steel front fork is designed with an open space that can be installed around your CV axle; the Popper wedges start at a depth of 1/4 inch to fit the tight space at work.
  • 【Easy to use】Insert the wedge-shaped wheel bearing tool between the transaxle housing and the shaft joint, with the fork-shaped end surrounding the shaft; tap the end of the front fork to loosen the half shaft; use shim popper to fill the larger gap on some vehicles.
  • 【Package Include】The package includes a wedge-shaped CV axle fork and a dummy gasket front fork; these CV joint puller ball joint tools are made of forged steel with a metal finish to provide maximum strength and durability.
  • 【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.

Last update on 2022-11-07 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 


 

 

Leave a Comment

Share to...