August 19, 2020 NHTSA CAMPAIGN NUMBER: 20E056000
Grille Moulding May Affect Cruise Control
If the sensor of the ACC cannot not function properly, the vehicle may accelerate or decelerate inappropriately when using ACC, increasing risk of crash.
NHTSA Campaign Number: 20E056
Manufacturer Tong Yang Industry Co.
Components STRUCTURE
Potential Number of Units Affected 105
Summary
Tong Yang Industry Co. (Tong Yang) is recalling certain Grille Mouldings, part number HD07251MB, sold for aftermarket installation on 2019-2020 Honda HR-V vehicles. The grille moulding coating may prevent the radar sensor for the Adaptive Cruise Control (ACC), located behind the front grille, from functioning properly.
Remedy
Tong Yang will notify their distributors. Tong Yang will reimburse customers for replacement parts and installation costs. This recall began September 15, 2020. Owners may contact Tong Yang Service by calling 1-972-542-5378 or emailing [email protected].
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
July 30, 2020
Notice of Voluntary Recall Program
Honda HR-V, 2019- EX/EX-L/Touring Model Grille Moulding
| Make/Model: | Honda HR-V |
| Model/Build Years: | EX/EX-L/Touring Model 2019- |
| Component: | Grille Moulding |
| Manufacturer: | Tong Yang |
To All distributors who Purchased a Recalled Grille Moulding:
Parts Covered by Recall:
The aftermarket grille moulding for the Honda HR-V 2019- EX/EX-L/Touring Model manufactured by Tong Yang (OE#71122T7 AJl1 / Partsli nk#HO1210163 / Tong Yang#HD07251MB) (“Recalled Grille Mouldings”).
Problem:
Due to a manufacturing defect, Recalled Grille Mouldings.
Actions to be taken by Distributors:
- Immediately stop selling and quarantine the Recalled Grille
- Immediately inform your customer of this
- Provide us with a list of the names, address, and telephone numbers of all repair shops and other customers who purchased a Recalled Grille Moulding from
- Request all repair shops and other customers who purchased a Recalled Grille Moulding from you to provide information regarding each customer whose vehicle was repaired using a Recalled Grille Moulding including the following:
Name and address of repair shop
Consumer’s name and address
Date of vehicle repair
Remedies:
Unsold Recalled Grille Mouldings
Tong Yang will reimburse you for all Recalled Grille Mouldings in your inventory. You should check your current inventory of Recalled Grille Mouldings and destroy them. Promptly inform us by email of the number of Recalled Grille Mouldings sold by you and the number of Recalled Grille Mouldings remaining in your inventory. Send us digital photographs of all destroyed Recalled Grille Mouldings including each shipping label, clearly showing your and our item numbers, lot number and purchase order number.
Recalled Grille Mouldings sold to Customers
If a Recalled Grille Moulding has been sold and installed by a repair shop, we will reimburse the repair shop for the cost of replacing the Recalled Grille Moulding with an OE Grille Moulding. Please request the repair shop to take digital photos showing the whole vehicle and the Recalled Grille Moulding . We will reimburse the repair shop directly upon receipt of an invoice for the repairs. Requests for reimbursement should be sent to:
Tong Yang Industry Co., Ltd.
98. An Ho Road, Section 2, Tain an, 70967, Taiwan, R.O.C.
Attention: Jacky Chiu
e-mail: [email protected]
We recognize that this recall will cause incon venience to our distributors . Please accept our sincere apologies as we work to swiftly resolve this issue for you. Please contact your sales representative if you have questions concerning this recall.
Sincerely,
Angus Tai
Assistant Vice President
Tong Yang Industry Co., Ltd.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| TONG YANG INDUSTRY | GRILLE MOULDING | |
9 Associated Documents
Recall Quarterly Report #1, 2020-3
RCLQRT-20E056-8424.PDF 211.13KB
Recall Quarterly Report #2, 2020-4
RCLQRT-20E056-1156.PDF 211.233KB
Recall Quarterly Report #4, 2021-2
RCLQRT-20E056-9147.PDF 211.418KB
Recall Quarterly Report #3, 2021-1
RCLQRT-20E056-5135.PDF 211.313KB
Recall Acknowledgement
RCAK-20E056-3469.pdf 244.762KB
Defect Notice 573 Report
RCLRPT-20E056-5092.PDF 213.523KB
Manufacturer Notices(to Dealers,etc)-TYI Distr 08
RCMN-20E056-1061.pdf 898.411KB
Recall Quarterly Report #5, 2021-3
RCLQRT-20E056-6023.PDF 211.528KB
Recall Quarterly Report #6, 2021-4
RCLQRT-20E056-3899.PDF 211.613KB
Latest Recalls Documents
- Grill Fitment - This front grill compatible with 2013-2015 Honda Accord 4 Door Sedans Only. Replacement for 71121T2FA01 HO1200214; Can be used to directly replace the damaged grill
- Grille Appearance - The streamlined design of the central grille is highly compatible with the car's exterior, enhancing its stylishness and aesthetic level after installation; Improve the aesthetic level of drivers
- Protective Performance - After installing this grille, it can effectively protect the internal engine components of the vehicle from damage, effectively reducing the impact of stones and branches on the stability of the internal engine
- Good Breathability - It has the function of driving the circulation of air inside the vehicle, promoting the stable input of clean air inside the vehicle; Provides a comfortable and stable driving experience
- Installation & Packaging - Please use screws and fasteners for the direct replacement and installation of this grill; the package contains one grill, with no installation accessories and instructions
- Grill Fitment - This front upper grill compatible with 2011-2012 Honda Accord Sedan 4 Door, will not fit Coupe Models. Replacement for HO1200203 71121TA0A11
- Grille Appearance - The streamlined design of the central grille is highly compatible with the car's exterior, enhancing its stylishness and aesthetic level after installation
- Good Breathability - It has the function of driving the circulation of air inside the vehicle, promoting the stable input of clean air inside the vehicle
- Protective Performance - After installing this grille, it can effectively protect the internal engine components of the vehicle from damage, effectively reducing the impact of stones and branches on the stability of the internal engine
- Package Installation - You will receive a front upper grille with dimensions of 34 1/4in (L) x 9in (W); The installation method is simple, you can install it directly, it's easy and convenient without modification
- Fits: For HONDA CR-V 2012 2013 2014 (submodel: EX, EX-L, LX, Touring)
- Package Included: 1 Pcs Front Grille Chrome Moulding
- OE/OEM Part Number: 71122T0GA01,Interchange Part Number: HO1217107
- Features: Chrome Upper Grille Molding. Perfect fit and Direct Replacement.
- Easy To Install:Directly Fixed In The Original Factory Position Without Cutting Or Adjusting
- Fitment - Bumper Grille For 2011 2012 Honda Accord Sedan 4 Door. Will not fit Coupe Models. Replace for OE Number 71121TA0A11. Replace for Partslink Number HO1200203.
- Material - The front accord bumper grille is made of high quality ABS material. Lightweight, durable and impact resistant.
- Improved Airflow - The 2011 Accord grille is designed to enhance airflow to the engine, promoting better cooling and performance to help cool down your radiator and engine.
- Protection from debris - 2012 Accord Grille can prevent road debris and rocks from entering the engine compartment, reducing the risk of damage to basic components.
- Installation - Easy to install, Correct Connector No cutting or splicing.
This product presentation was made with AAWP plugin.