NHTSA Campaign Number: 15V559
Manufacturer Honda
(American Honda Motor Co.)
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 17,796
If the wires become damaged, the coil may overheat and cause the engine to stall, increasing the risk of a crash.
Summary
Honda (American Honda Motor Co.) is recalling certain model year 2015 Fit vehicles manufactured December 6, 2013, to August 28, 2014. The affected vehicles may experience damage to the wires inside the Plug Top Ignition Coils (PTC) due to improper protection against electrical noise.
Remedy
Honda will notify owners, and dealers will replace the Plug Top Ignition Coils with new design, free of charge. The recall began on October 9, 2015. Owners may contact Honda Automobile Customer Service at 1-888-234-2138. Honda’s number for this recall is JT9.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Honda has a Recall
Service Bulletin
A15-060
June 23, 2016
02376 Version 3
Safety Recall: Ignition Coils
Supersedes 15-060, dated September 16, 2015, to revise the information highlighted in yellow.
AFFECTED VEHICLES
| Year | Model | Trim | VIN Range |
| 2015 | Fit | ALL | Check the iN VIN status for eligibility |
REVISION SUMMARY
Under BACKGROUND, a note was added for vehicles that come in with the MIL on that are eligible for this recall.
BACKGROUND
The noise suppression capacitors inside the ignition coils may degrade over time causing the MIL to come on, the engine or fuel injection system to malfunction, or in severe cases, the engine to stall.
NOTE: If the MIL is on with DTC P0300 (random misfire detected) or P0301โP0304 (cylinder misfire detected), refer to service bulletin 16-034, MIL Comes On with DTC P0300, P0301, P0302, P0303, P0304, and do that procedure first.
Then, make sure you do this bulletin to complete the repair.
CUSTOMER NOTIFICATION
Owners of affected vehicles will be sent a notification of this campaign.
Do an iN VIN status inquiry to make sure the vehicle is shown as eligible.
Some vehicles affected by this campaign may be in your new or used vehicle inventory. These vehicles must be repaired before they are sold.
Should a dealership sell an unrepaired vehicle that subsequently causes an injury or damage because of the recalled item, the dealership will be solely responsible to the damaged party, and will be required to defend and indemnify American Honda for any resulting claims. To see if a vehicle in inventory is affected by this campaign, do a VIN status inquiry before selling it.
CORRECTIVE ACTION
Replace the four ignition coils and, if necessary, clean the spark plug connection ends.
PARTS INFORMATION
| Part Name | Part Number | Quantity |
| Ignition Coil | 30520-5R0-013
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API | 4 |
WARRANTY CLAIM INFORMATION
The normal warranty applies.
| Operation Number | Description | Flat Rate Time | Defect Code | Symptom Code | Template ID | Failed Part Number |
| 1175A2 | Replace the ignition coils and if necessary, clean the spark plug connection end. | 0.4 hr | 5YW00 | JT900 | 15-060A | 30520-5R0-003 |
Skill Level: Repair Technician
REPAIR PROCEDURE
- Disconnect the ignition coil connectors.
- Remove the ignition coils.
- Remove the spark plugs.
- Inspect the connection end of the spark plugs.
- If the spark plug connection ends have corrosion on them, clean them with a commercially available cleaner, then reinstall the spark plugs and torque them to 22 Nยทm (16 lb-ft).
- If the spark plug connection ends does not have any corrosion on them, reinstall the spark plugs and torque them to 22 Nยทm (16 lb-ft).
- Install the new ignition coils and torque them to 12 Nยทm (9 lb-ft).
- California residents only: Fill out a Vehicle Emissions Recall โ Proof of Correction certificate, and use JT9 as the recall number. Give the certificate to your customer, and advise him or her to keep it as proof that the recall was completed. Your customer will need to submit this certificate to the DMV only if the DMV requests it. If you need more certificates, use reorder number Y0657.
END
- ๐ใ2026 MaxiCOM MK908 Pro IIใUpdated of the old ver. MK908P, MS908S Pro, Autel released the 2.0 version MK908 Pro II (No-IP limited ver. of MaxiSYS MS908S PRO II & MSultra) to bring you a brand-new experience at the same cost. 1) Hardware upgrade: Qualcomm 660, 4+128GB, the latest Android 10, etc.2) Advanced features: J2534 Pr0g.ramming, c.0ding, active test, 10+ newly added features. 3) Broader coverage: 150+ brands, FCA AutoAuth. One device can totally support all the needs of a repair shop.
- ๐ใJ2534 Pr0gramming & C0dingใTake your vehicle diagnostics to professional heights with the MK908P II Proโs J2534 RePr0gramming feature. Elite II Pro diagnostic scanner delivers OE-level precision for Pr0gramming and C0ding, making it a must-have for shops and advanced users. The MK908P II offers the same capabilities as high-end scanners like Elite II Pro, MS909, MS919, Ultra Lite, and Ultra S2, while delivering better overall value.
- ๐ใ40 Service for 150+ brandsใSame as the OE scanners like snap-on, maxisys ultra ms919 scanners, Autel MK908P II has strong service capability and can go deep into every part to perform matching and resetting functions. What is better than the OE tools is that 40 services are not just for one specific brand, but for over 150 makes, covering 99% of the models from 1996-2026. MK908P 2 also supports AutoAuth, and Re*nault SGW, so you don't have to worry about compatibility issues.
- ๐ใAll System Diagnosis & Comprehensive ReportใCode reader MK908PRO II, same as elite ii pro, is a professional automotive diagnostic tool compatible with all systems diagnostics. It can diagnose all symptoms of faulty parts, including reading and clearing DTC. View a live data stream from every system. That real-time data means no delay in getting to work. Pre and post-scan reports keep your clients informed of the repair details and provide them with the evidence to settle insurance claims.
- ๐ใActive Test Gives In-depth Knowledge of CarsใUnlike conventional mechanic scanners, escaner automotriz professional MS908S PRO II MK908P II allows users can get access to the vehicle subsystem and output commands to the related systems, thus driving the actuat0rs to perform a specific function and determining the integrity of the system or parts. Monitor the operation of the actuat0rs for accurate diagnostics, such as switching a solenoid, relay, or switch, between two operating states.
Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API
- Great Present Idea: LAUNCH Scanner X431 Pro3 (V+) V5.0 is a top present choice for your father, husband, brother or boyfriend if they own a repair shop, or they are an auto technician. We provide 2 years no-fee update. This is a 2026 NEW Elite 5.0 Version high-end professional diagnostic scanner.
- [OE-Level ECU Coding] Say goodbye to complicated car fixes! With LAUNCH X431 PRO3 (V+) V5.0, tweak your carโs brain like a pro, no fancy ECU Coding skills needed! 1) Online/Offline operation of your choice; 2) Backup/restore coding data; 3) Detailed coding guidance. 4) Extensive database for 200+ brands (compatible with V.A.G, BMW, Ford, GM, etc.) >> Fix ECU issues fast, open secret settings for upgrades, replace parts hassle-free, or even make a personalized ride (e.g. seatbelt warning off, headlights flash when alarm, dashboard brightness change, moving pointer self-check). Enjoy 2 years of free updates to stay compatible and lifetime tech support to overcome any obstacle.
- [Topology Mapping + All Systems Scan] After connecting to the vehicle, you can enter the โTopology Mappingโ to perform a deep scan of all on-board systems like CEM, ECM, TCM, ABS/BCM, DIM, ASDM, BBS, IMS, SWM, HUD, SCL, TACM, AUD, etc., to quickly understand interconnections and data flow between ECUs. LAUNCH PRO3 (V+) V5.0 professional escaner automotriz features intuitive color-coded topology showing all structures between vehicle modules, and coupled with 8000+ DTCs and step-by-step guidance to help you cut 70% diagnostic time. See results at a glance, simply click to check faults!
- [Experience Advanced Bi-directional Control in LAUNCH Scanner X431 PRO3 (V+) V5.0 60 seconds fault detection! This bidirectional scan tool will use 4000+ Active Tests to transform complex issues into simple and clear result. Just pick the test you need and follow the on-screen instructions. This LAUNCH scanner will automatically send commands to the ECU, get the actuators working, and show you the results. >> It covers all system-related actuators, be it โfans, lights, horn, doors, windows, brakes, throttle, A/C, clutches, mirrors, cameras, pumps, valvesโ, or anything else. And itโs all very straightforward, so even if youโre new to this, youโll have no trouble getting the job done.
- [55+ Hot Reset Services] LAUNCH X431 PRO3 (V+) V5.0 car scanner empowers technicians with 55+ reset services, saving significant time and cost while ensuring vehicle systems operate at peak specification. It can calibrate complex systems like Steering Angle Sensor (SAS), Electronic Parking Brake (EPB), Battery Management System (BMS), and throttle adaptations. Perform oil resets, sunroof initializations, and injector coding, ensuring accurate system relearns and enhanced repair reliability for modern vehicles. Maximize workshop productivity and first-time fix rates.
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
No products found.
This product presentation was made with AAWP plugin.
Dear Sir/Madam,
My Name is Ahmad Zainul Fajri. I am from Batam Island, Indonesia.
I have purchased used car Honda Fit 2015, chassis no. GK31046517, Machine no. L13B1055533. I got problem with the coil. When driving in longer range, the machine started to choked up when driving.
I read in the internet that Honda recall for Fit 2015 for this problem.
Can I get the recall for my car?
Thank You and Best Regards,
Ahmad Zainul Fajri
M: +6281277035481
This recall is for USA and Canada.