“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10199348
Manufacturer Communication Number: A20-049
Summary
Service Bulletin – There is a popping or crackling from the speakers or no sound from the audio system. You may also see a Network Loss message and/or display issues.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
HONDA | ODYSSEY | 2021 |
SYMPTOM
There is a popping or crackling from the speakers or no sound from the audio system. You may also see a Network Loss message and/or display issues.
POSSIBLE CAUSE
There is a loose connection in the MOST bus network.
CORRECTIVE ACTION
Install the FAKRA connector set.
PARTS INFORMATION
Part Name | Quantity | Part Number |
FAKRA Service Housing | 3 | 39817-TJB-AC0![]() |
TOOL INFORMATION
Tool Name | Tool Number | Quantity |
Straight FAKRA Puller | 07AAC-THRA200 | 1 |
Cargo Cap Screw Socket | 07AAA-SEPA100 | 1 |
INSPECTION PROCEDURE
- Turn the ignition to ON.
- Press and hold the VOL/Power AUDIO knob, Day/Night icon, and HOME icon at the same time. Then, release them when you see the Dealer Diagnostics
- Select DETAIL INFORMATION & SETTING.
- Scroll down the menu, and select SHUTDOWN REASON.
In this example, the cause of the failure can be identified as Meter:SUDDEN_SIGNAL_OFF.
Write down any failures; they will be collected on the warranty claim. Then, clear the data.
REPAIR PROCEDURE
- Remove the lower vent covers.
- Loosen the upper column cover.
- Disengage the clips around the meter bezel. Then, remove it with the upper column cover as one piece.
- Remove the three screws holding the gauge control module.
- Turn the gauge control module to access the rear connectors. Then, using the straight FAKRA tool, disconnect the red and green FAKRA connectors, and remove them from the gauge control module. Do not pull on the units or MOST feeders while the FAKRA connectors are connected to help prevent communication issues.
NOTE: For more information on using the FAKRA tools, see the job aid, Using the MOST Connector Tools.
- Remove the cover above the center display unit.
- Remove the center dash trim.
- Remove the two screws.
- Remove the side cover.
- Remove the two screws.
- Remove the lower dash panel.
- Remove the passenger lower panel.
- Remove the driver lower console panel and the passenger lower console panel.
- Pull back the cover, and remove the bolt.
- Remove the rubber liner, and pull back the lower console cover.
- Remove the two screws from the dashboard center pocket, then pull back the panel.
- Remove the two upper screws, and loosen the two lower screws.
NOTE: Some models will have a CD player, DVD player or center pocket.
- Remove the DVD player, CD player or center pocket to gain access to the two 8 mm bolts holding the infotainment unit.
- While looking upward from underneath where the DVD player, CD player, or center pocket was removed, loosen the two 8 mm bolts holding the infotainment unit, then remove the unit.
- In the rear cargo area, remove the rear trim panel.
- On the right rear quarter panel, remove the hook bolts. If needed, use Cargo Cap Screw Socket (T/N 07AAA-SEPA100) to loosen the bolts.
- Remove the covers then remove the two screws from the passenger side inner rear quarter panel.
- Remove the lower passenger sliding door trim.
- Remove the right quarter inner panel, then disconnect the connectors.
- Disconnect the red and green FAKRA connectors from the stereo amplifier (Elite) or tuner-amplifier unit (EX, EX-L, Touring), gauge control module, and infotainment unit using the straight FAKRA puller. Do not pull on the units or MOST feeders while the FAKRA connectors are connected to help prevent communication issues.
NOTE: Disassemble the connectors one at a time to avoid swapping the green and red wires.
- Using a small screwdriver, remove the secondary lock, then break off the tab as shown. Then, discard the housing and lock.
- Pull and twist the housing counterclockwise to remove it from the wire.
- Select the correct color FAKRA housing, then slide the new terminal onto the wire until it clicks into place.
- Line up the locking tabs on the FAKRA housing with the new terminal, then push the terminal into the housing until it clicks into place.
- Repeat steps 26 thru 29 for the other connectors. Then, install the FAKRA connectors to the gauge control module, infotainment unit, and stereo amplifier or tuner-amplifier unit.
- Install all of the removed parts in the reverse order. When installing units, make sure the harness is routed correctly. A mis-routed harness can put pressure on the wires and connectors causing connection issues. Do not pull on the units or MOST feeders while the FAKRA connectors are connected to help prevent communication issues.
- Test-drive the vehicle to confirm the repair.
END
SEOCONTENT-START
Service Bulletin
20-049
July 12, 2021 Version 6
2021 Odyssey: Popping or Crackling from the Speakers; No Sound from the Audio System; Network Loss Message and/or Display Issues
Supersedes 20-049, dated June 17, 2021, to revise the information highlighted in yellow.
AFFECTED VEHICLES
Year
Model
Trim Level
VIN Range
2021
Odyssey
ALL except LX
ALL
REVISION SUMMARY
Under CORRECTIVE ACTION, the correction was updated.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Page 2 of 14
Operation Number
Description
Flat Rate Time
Defect Code
Symptom Code
Template ID
Failed Part Number
0101Q5
Access the gauge control module, infotainment control unit, and stereo amplifier or tuner-amplifier unit, then replace the affected FAKRA connectors (includes test-drive).
2.0 hr
03214
03217
A20049A
39540-THR-A73
Skill Level: Repair Technician
SEOCONTENT-END
NHTSA ID Number: 10187523
Manufacturer Communication Number: A20-049
Summary
Service Bulletin – There is a popping or crackling from the speakers or no sound from the audio system. You may also see a Network Loss message and/or display issues.
1 Associated Document
Manufacturer Communications
A20-049
February 18, 2021
Version 4
https://www.nhtsa.gov/recalls?nhtsaId=10187523
MC-10187523-0001.pdf 4676.101KB
NHTSA ID Number: 10198171
Manufacturer Communication Number: A20-049
Summary
Service Bulletin – There is a popping or crackling from the speakers or no sound from the audio system. You may also see a Network Loss message and/or display issues.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
HONDA | ODYSSEY | 2021 |
1 Associated Document
Manufacturer Communications
A20-049
June 17, 2021
Version 5
https://www.nhtsa.gov/recalls?nhtsaId=10198171
MC-10198171-0001.pdf 4701.215KB
1 Associated Document
Manufacturer Communications
A20-049
July 12, 2021
Version 6
https://www.nhtsa.gov/recalls?nhtsaId=10199348
MC-10199348-0001.pdf 4686.65KB
- 【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 2024 Top Choice for ABS Bleeder Scan Tool - Is the brake pedal always slowly sinking down or becoming loose? This ABS brake bleeding scan tool will cycle the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with ABS auto bleed. By following the instruction step by step, even a beginner can navigate through easily. Coverage check before purchasing via FOXWELL official site: Support- Diagnostic Coverage List. Tip: It won’t work on vehicles lacking an auto bleed function.
- More Than a Entry Level OBD2 Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD-II diagnostics to the next level by customizing functions for ABS and SRS system. This SRS and ABS scanner provides in-depth insights on error code diagnosis, wheel speed sensor, airbag circuits, cable connectors monitor, etc... Note: This scanner DOES NOT work on Airbag crash data/programming issues.
- No More Higher End Service than You Need - One NT630 Plus is enough! This obd2 scanner with ABS and SRS takes in-depth diagnosis on Anti-Lock Brake System & SRS/Airbag, and also performs Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset daily reset services. These issues will be restored after the car faults repaired. Note: Some classic vehicles without the electronic control system can not support the reset service.
- Also can Work like NT301 - The NT630 Plus ABS code reader can connect to the OBD-II port directly. It will diagnose all OBD-II modules instantly, displays the live data, locates bad sensors and indicate I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Higher-level Services wih Lower Cost - Cost less to own a ABS SRS Bidirectional Scan Tool that is not found on similar code readers & scan tools. This car diagnostic scanner allows you to test all potential car faults in the ABS/Airbag system, with functions returning to normal once you exit the program. Please note, that only ABS/SRS modules are supported.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN). Please send your vehicle information to our 💌amazon@anceltech.com💌 to check compatibility.
- For Volkswagen (VAG) vehicles diagnostics, the device can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad and throttle position adaption.
- For other OBD II vehicles (non-Volkswagen), the VD500 can read and clear fault codes, display fault code definitions, turn off the CEL (check engine light) and retrieve VIN information ONLY.
- The VD500 diagnostic offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics.
- With English and German as display languages, this diagnostic scan tool provides life-time free software updates to fix the latest bugs or add new parameters. Simply download the software from the official website, then follow on-screen instructions to install it.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner with SD card only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only, but not for Mac and ios system. 📧Any concerns, pls feel free to 𝙚-𝙢𝙖𝙞𝙡 us via 𝙖𝙢𝙖𝙯𝙤𝙣 @ 𝙖𝙣𝙘𝙚𝙡𝙩𝙚𝙘𝙝. 𝙘𝙤𝙢.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 automotive scanner diagnostic tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use this obd2 scanner with abs and srs to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 OBD2 scanner diagnostic tool also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【A/T TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the A/T transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. This transmission scanner provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 obd2 scanner with abs and srs is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- [OBD2 Scanner] The TOPDON OBD2 scanner performs all ENG/AT/SRS/ABS diagnostics with 4-in-1 graphic live data. 🚩It covers all OBD2 tests for 67 manufacturers and 10000+ model. It also features 5-second one-touch AutoVIN, 🚩a free one-touch lifetime upgrade through WiFi, library DTC, 12 languages, 🚩printable auto-generated report with email sharing, 🚩smooth Android 11.0, 32GB ROM, 🚩vivid 5-inch touchscreen, and up to 10 hours of battery life.
- [4 Car System Code Reader] The TOPDON OBD2 scanner accesses 4 systems: 🚩Engine/ABS/SRS/Transmission. It identifies the ECU version, pull DTCs with 4-in-1 graphic live data and DTC explanation to identify issues, erase DTCs to turn off the warning lights after repair (For cars made in 2005 and newer). In order to help you extend the lifespan of your vehicle while improving performance, this code reader also includes all obd2 test modes to solve the major concerns for all vehicles.
- [User-Oriented TOPDON OBD2 Scanner] With this scan tool's touchscreen and rubberized buttons, you may easily navigate through menus or process while following a logical path. With 32GB on-board memory, the scanner enables for the recording of several diagnostic reports, which can be shared via email and printed for review. Along with this, you can 🚩upgrade your software for free for lifetime with one-touch over Wi-Fi for that help update the features and expanding car coverage.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. 🚩Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Wide Coverage] With its multilingual menu and 🚩coverage of 67 car brands and 10,000+ models spanning North America, Europe, and Asia (including Malaysia, India, and Iran), this car scanner is compatible with the majority of 1996 and newer OBDII compliant automobiles (EN, FR, ES, DE, IT, RU, PT, JP, KR). Before buying, make sure the OBD2 scanner is compatible with your vehicle. The package contains only a charging cable and not a power adapter.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
- 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
- 🚗【Cover 10000+ models &60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
- 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
- 🎁【Great festival Idea:Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.