Inside Rearview Mirror Is Loose – 2001-2008 Acura

“This site contains affiliate links for which OEMDTC may be compensated”

B06-012
August 12, 2009

 

Applies To: See VEHICLES AFFECTED

 

Inside Rearview Mirror Is Loose

(Supersedes 06-012, dated April 14, 2006, to revise the information marked by the black bars)

 

REVISION SUMMARY

Under VEHICLES AFFECTED, the model year range for the TL was changed to all 2004–08 models.

 

SYMPTOM

The rearview mirror is loose at the windshield, allowing it to vibrate while driving.

 

PROBABLE CAUSE

The mounting spring inside the mirror bracket is deformed.

 

VEHICLES AFFECTED

2001–03 CL – ALL
2001–03 MDX – ALL
1999–03 3.2TL – ALL
2004–08 TL – ALL

 

CORRECTIVE ACTION

Replace the mounting spring.

 

PARTS INFORMATION

Mounting Spring: P/N 76419-SZ3-J05

 

TOOL INFORMATION

KTC Trim Tool Set: T/N SOJATP2014

 

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Operation Number: 828145
Flat Rate Time: 0.4 hour
Failed Part: P/N 76419-SZ3-J05
Defect Code: 06201
Symptom Code: 04501
Template ID: 06-012A
Skill Level: Repair Technician

 

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

 

REPAIR PROCEDURE

  1. Remove the rearview mirror from the windshield.
  1. Remove the screw and the spring from the mirror bracket.

SPRING

 

  1. Install the new spring to the mirror bracket. The spring must be seated all the way down when you tighten the screw. Make sure the wiring harness is not pinched.
  2. Reinstall the rearview mirror to the windshield.

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [119.90 KB]

 

 

Leave a Comment

Share to...