Transmission End Cover Leaks (9-Speed A/T) – 2018-2019 Honda Odyssey & 2016-2019 Pilot

“This site contains affiliate links for which OEMDTC may be compensated”

Service Bulletin

A16-087
September 18, 2018
10075 Version 3

 

Transmission End Cover Leaks (9-Speed A/T)

Supersedes 16-087, dated September 9, 2017, to revise the information highlighted in yellow

 

AFFECTED VEHICLES

Year Model Trim VIN Range
2018 Odyssey LX, EX, EX-L ALL
2019 Odyssey LX, EX, EX-L 5FNRL6H..KB000031 thru 5FNRL6H..KB021038
2016–18 Pilot Touring, Elite ALL
2019 Pilot Touring, Elite 5FNYF6H..KB000032 thru 5FNYF6H..KB002157
2019 Pilot Touring, Elite 5FNYF5H..KB000011 thru 5FNYF5H..KB000346

 

REVISION SUMMARY

Under AFFECTED VEHICLES, 2019 Odyssey and Pilot were added.

 

SYMPTOM

The transmission end cover leaks on vehicles with a 9-speed A/T.

 

POSSIBLE CAUSE

During assembly, the transmission end cover sealing gasket was torn.

 

CORRECTIVE ACTION

Replace the transmission end cover sealing gasket.

 

REQUIRED MATERIALS

Part Name Part Number Quantity
Honda Genuine ATF Type 3.1 08200-9017 1

 

PARTS INFORMATION

Part Name Part Number Quantity
End Cover Kit (Includes: 11 Torx bolts, cover, seal, and plugs) 06233-5J4-000 1

 

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Operation Number Description Flat Rate Time Defect Code Symptom Code Template ID Failed Part Number
2321S2 Replace the transmission end cover sealing gasket and check ATF level. 1.0 hr 08001 05104 16-087A 06201-5EY-A06

 

Skill Level:  Repair Technician

 

REPAIR PROCEDURE

  1. Raise the vehicle on a lift.
  2. Odyssey only: Remove the left front wheel, then loosen and remove the fender liner as needed to access the transmission end cover.

fender liner

  1. Pilot only: Loosen the front of the inner fender to access the transmission end cover.

fender liner

  1. Remove the 11 T-30 Torx bolts from the end cover.

11 T-30 Torx bolts

  1. Replace the cover, the sealing gasket, and bolts with the new ones from the kit. Torque the bolts to 10.0 N·m (7 lb-ft) in the sequence shown.

Replace the cover, the sealing gasket, and bolts

  1. Reinstall the fender liner.
  2. Odyssey only: Reinstall the left front wheel.
  3. Go to ATF level check.

 

ATF LEVEL CHECK

  1. Connect the i-HDS. Go to the A/T Data List, and scroll down to ATF Temperature.
  2. Enter VSA Maintenance Mode

NOTE: You must enter this mode to complete the ATF level check; it disables the VSA and TCS functions. Be sure to complete all of the following steps within 30 seconds, or you’ll need to start over.

  1. Turn the ignition to ON.
  2. Press and hold the brake pedal, and release the parking brake.
  3. Press and hold the VSA OFF switch until the VSA OFF indicator comes on. Then, press the switch again until the indicator goes out.
  4. Release the brake pedal, and set the parking brake.
  5. Press and hold the VSA OFF switch until the VSA OFF indicator comes on. Then, press the switch again until the indicator goes out.
  6. Press and hold the brake pedal.
  7. Press the VSA OFF switch. If the VSA OFF indicator comes on, press the switch again and release it. If successful, the VSA OFF indicator starts blinking and the VSA indicator comes on. You are now in VSA maintenance mode. To exit this mode, either turn the ignition switch to OFF or quickly press and release the VSA OFF switch, making sure the VSA OFF and VSA indicators go out.
  8. Start the engine, and wait for the transmission temperature to reach 90°F.

NOTE: If the temperature is more than 115°F (the vehicle may have been recently driven), shut off the engine and let the transmission cool down before continuing.

  1. Shift to Drive, then press the D/S button again to enter sequential mode.
  2. Using the paddle shifters, shift to 1st, 2nd, 3rd, then 4th Then, shift back to 3rd, 2nd, and 1st gear.

IMPORTANT: Do not shift past 4th gear with the vehicle on the lift; you could damage the transmission.

  1. Apply the brakes to stop the wheels from spinning, then shift to Park.
  2. Raise the engine speed to 2,000 rpm for about 5 seconds, then release the accelerator pedal. Repeat this until the transmission temperature reaches about 100°F, then wait for the temperature to reach 104 to 115°F.

NOTE: The ideal temperature for checking the ATF level is 104°F. If it’s more than 115°F, shut off the engine, let the transmission cool down, and start over again.

  1. With the engine running, remove the level plug.

IMPORTANT: With the level plug removed, you must keep the engine running. If you shut it off, the ATF will pour out of the transmission.

  • If a small amount of ATF trickles out of the level plug hole and keeps doing so, the level is OK. Install a new level plug, and torque it to 35 N·m (26 lb-ft).
  • If no ATF comes out, loosely install a new level plug and lower the vehicle. Remove the fill plug, and add the appropriate amount of ATF Type 3.1 through the fill plug hole. Then, install a new fill plug, and check the ATF level again by removing the level plug. Be sure to monitor the ATF temperature while doing this. When you are done, install the level plug, then torque the level and fill plugs to 35 N·m (26 lb-ft).

ATF Level

  1. Turn the ignition to OFF.
  2. Install the engine undercovers (if removed).

END


A16-087
September 18, 2018
10075 Version 3

https://www.nhtsa.gov/recalls?nhtsaId=10145388

https://static.nhtsa.gov/odi/tsbs/2018/MC-10145388-9999.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [638.53 KB]

 


 

SaleBestseller No. 1
Lucas Oil 10009 Transmission Fix - 24 Ounce
  • The #1 transmission problem solving additive
  • Contains no solvents
  • Can be added to existing fluid without draining any out
  • Effective in an extremely high percentage of cases
  • Extends needed protection to planetary gears
SaleBestseller No. 2
Bar's Leaks High Mileage Transmission Repair, 16.9 Fl Oz
  • STOPS LEAKS, SLIPPING AND ROUGH SHIFTING: Reduces rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.
  • RESTORES PERFORMANCE: Premium high mileage formula restores transmission performance and saves on costly transmission / transaxle repairs.
  • FLUID STABILIZER: Use when topping off existing fluid when low, or add a bottle when changing the fluid.
  • SEALS CONDITIONERS: Stops leaks, slipping and rough shifting. Reduces heat & friction, and stabilizes fluid.
SaleBestseller No. 3
Prolong Super Lubricants PSL15000 Transmission Treatment - 8 oz.
  • Includes a Formula with Anti-Friction Metal Treatment Technology
  • Features Engineering Designed to Treat Metal Surfaces Through a Molecular and Chemical Process
  • Offers Molecules that Interact with Metal Surfaces and Chemically Bond to Create a Protective Layer that Reduces Damaging Friction and Heat
  • Offers to Treat the Metal Surfaces of Both Standard (Manual) and Automatic Transmissions
  • Features a Formula that Promotes Smoother Manual Shifts and Helps Restore Responsiveness in Automatic Transmissions
Bestseller No. 4
XADO EX120 Automatic Transmission Fix - Treatment for CVT & Other Gearbox Types | ATF Additive & Protectant - Reduces Sticking, Shudder and Slipping
  • Rebuilds And Restores Metal Parts And Protects Them From Future Wear.
  • Anti Friction Modifier. Eliminates Surfaces Defects & Protects From Extreme Heat
  • Stops Transmission Shudder, Reduces Noise & Vibration. Ultimate Stop Slipping Additive
  • Increases Performance Reliability And Prolongs Service Life Of Control Gears
  • Universal for Automatic, CVT, Tiptronic, Manumatic, Semi-Automatic Transmission
SaleBestseller No. 5
Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz
  • Fit type: Universal Fit
  • Reduces wear throughout the transmission and optimizes total transmission performance
  • Prevents overheating, reducing elevated operating temperatures - Optimizes total transmission performance
  • Eliminates clutch chatter and torque converter shudder; Softens and modifies harsh shifts making them quicker in duration
SaleBestseller No. 6
Lubegard 63010 Platinum Automatic Transmission Fluid Protectant, 10 oz.
  • The Original Universal ATF Protectant that Eliminates ATF Confusion and the need to stock multiple ATF's - Dramatically reduces friction and wear on metal parts and internal components
  • Will not alter the crucial sulfur balance in your transmission fluid, Prevents overheating, Will not harm yellow metals, Inhibits fluid oxidation and foaming
  • Contains patented Synergol TMS Technology, a synthetic molecule that tightens the shift cycle without losing the friction modification at lockup, which eliminates shudder
  • Extends fluid change intervals, Protects and restores seals for optimum performance, Conditions and restores seals and o-rings
  • Does not contain any harmful components such as zinc (ZDDP)/ash, etc. , like other competing products, Frees stuck valves and keeps them free, Ensures proper shifts
SaleBestseller No. 7
Slick 50 41806015 Recharged High Mileage Automatic Transmission and Engine Treatment, 15-Ounce , black
  • Helps eliminate transmission shudder
  • Restores ATF additive content and provides additional protection to transmissions
  • Prevents transmission leaks and aids high mileage transmissions by lubricating seals
  • Can be added anytime or while doing a transmission fluid change, leave adequate fill space
  • Helps erratic shift and loss of torque
Bestseller No. 8
Lucas Oil 10441 Automatic Transmission Fluid Conditioner - 20 Ounce
  • Improves shifting
  • Extends fluid life
  • AFFORDABLE SOLUTIONS
  • Reduces noise and shudder
Bestseller No. 9
K&W 402916X6 Trans-X High Mileage Automatic Transmission Treatment - 16 Fl Oz Leak Repair Solution for Automotive, Power Steering, Hydraulic Systems | Car Care Fluids
  • K&W SEALANTS & SOLUTIONS: From head gaskets and engine blocks to automatic transmissions and power steering, K&W products are made to stop leakage in aging vehicles. Our sealants provide an effective alternative to costly repairs and parts replacements.
  • TRANS-X LEAK REPAIR FLUID: Specially developed for vehicles with 75,000 miles or more, this automatic transmission fluid extends the transmission life, stops leaks, repairs leaks, prevents future leaks & restores smooth shifting.
  • APPLICATION RANGE: Our leak stop fluid is formulated to prevent and restore smooth shifting in vehicles with high mileage. Trans-X is not compatible with CVT or manual transmissions.
  • SAFE HANDLING: Highly flammable transmission stop slip must be stored in a well-ventilated place away from heat, sparks, and open flame. Wear appropriate personal protective equipment such as safety glasses and gloves.
  • PRODUCT SPECIFICATIONS: Trans-X High Mileage Transmission Fluid is available with 16 Fl Oz fill.
Bestseller No. 10
DR TRANNY LUBEGARD AUTOMATIC TRANSMISSION INSTANT SHUDDER FIX 6 PACK

Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...