“This site contains affiliate links for which OEMDTC may be compensated” |
Service Bulletin
A18-080
October 4, 2018
Version 3
A/C Does Not Blow Cold Air and Condenser Leaks at Receiver Dryer Cap
Supersedes 18-080, dated August 25, 2018, to revise the information highlighted in yellow
AFFECTED VEHICLES
Year | Model | Trim | VIN Range |
2016-17 | Pilot | ALL | ALL |
2018 | Pilot | 2WD | 5FNYF5…JB000001 thru 5FNYF5…JB008758 |
2018 | Pilot | AWD | 5FNYF6…JB000001 thru 5FNYF6…JB017071 |
2017-18 | Ridgeline | ALL | ALL |
2019 | Ridgeline | 2WD | 5FPYK2…JB000001 thru 5FPYK2…JB002793 |
2019 | Ridgeline | AWD | 5FPYK3…JB000001 thru 5FPYK3…JB015214 |
REVISION SUMMARY
Under WARRANTY CLAIM INFORMATION, the flat rate time for millimeter wave radar aiming was added, and under REPAIR PROCEDURE, step 10 was added.
SYMPTOM
The A/C does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained.
POSSIBLE CAUSES
There is poor O-ring compression against the receiver/dryer barrel wall.
CORRECTIVE ACTION
Remove the A/C condenser, and replace the filter sub-assembly. Then, recharge the A/C system.
PARTS INFORMATION
Part Name | Part Number | Quantity |
Filter Sub-Assembly | 80101-TG7-A01 | 1 |
REQUIRED MATERIALS
Part Name | Part Number | Quantity |
POE Oil: Delphi RL85HM | 38899-RLV-A01 | 1 (One can repairs four vehicles.) |
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Pilot and Ridgeline without Honda Sensing
Operation Number |
Description | Flat Rate Time |
Defect Code |
Symptom Code |
Template ID |
Failed Part Number |
6161G3 | Remove the A/C condenser, and replace the filter sub-assembly. | 2.2 hrs | 07406 | 03220 | A18080A | 80100-TG7-A01 |
A | Evacuate and recharge the A/C system. | 0.7 hr |
Operation Number |
Description | Flat Rate Time |
Defect Code |
Symptom Code |
Template ID |
Failed Part Number |
6161G3 | Remove the A/C condenser, and replace the filter subassembly. | 2.2 hrs | 07406 | 03220 | A18080B | 80100-TG7-A01 |
A | Evacuate and recharge the A/C system | 0.7 hr | ||||
M | Radar aiming- add | 1.4 hrs |
Operation Number |
Description | Flat Rate Time |
Defect Code |
Symptom Code |
Template ID |
Failed Part Number |
6161G3 | Remove the A/C condenser, and replace the filter subassembly. | 2.2 hrs | 07406 | 03220 | A18080C | 80100-TG7-A01 |
A | Evacuate and recharge the A/C system | 0.7 hr | ||||
M | Radar aiming- add | 0.9 hr |
Skill Level: Repair Technician
INSPECTION PROCEDURE
Check if the A/C is blowing cold air and there is staining around the receiver dryer cap on the condenser.
- If the A/C is not blowing cold air and there is staining around the receiver dryer cap on the condenser, go to REPAIR PROCEDURE.
- If the A/C is not blowing cold air and there is no staining around the receiver dryer cap, continue with normal system troubleshooting.
REPAIR PROCEDURE
- Recover the A/C refrigerant from the system. Refer to the service information.
- Remove the A/C condenser from the vehicle. Refer to the service information.
- Thoroughly clean the stain from the affected area on the condenser.
- Remove the sub-assembly (cap, filter, and desiccant bag) from the condenser.
NOTES
- Install the new desiccant bag as quickly as possible to prevent the system from absorbing moisture from the air.
- You will need to add 10 ml of refrigerant oil (P/N 38899-RLV-A01) with the replacement of the desiccant bag.
- Do not over tighten the plastic receiver/dryer cap; it could get stripped.
- Wipe the interior threads and sealing area of the receiver/dryer barrel with a lint-free cloth to remove all debris.
- Apply a thin layer of refrigerant oil to the O-rings. Then install the new filter sub-assembly, and torque the cap to 12 N·m (9 lb-ft).
- Install the A/C condenser. Refer to the service information.
- Evacuate and recharge the A/C system. Refer to the service information.
- Make sure the A/C system is operating properly.
- With Honda Sensing: Do the millimeter wave radar aiming procedure. Refer to service information.
NOTE
The millimeter wave radar aiming procedure must be done whenever the millimeter wave radar is removed or replaced.
END
A18-080
October 4, 2018
Version 3
https://www.nhtsa.gov/recalls?nhtsaId=10145428
https://static.nhtsa.gov/odi/tsbs/2018/MC-10145428-9999.pdf
A18-080
August 25, 2018
Version 2
https://www.nhtsa.gov/recalls?nhtsaId=10144790
https://static.nhtsa.gov/odi/tsbs/2018/MC-10144790-9999.pdf
- UNABLE TO SHIP THIS ITEM TO CALIFORNIA and WASHINGTON
- All in one solution to restore lost refrigerant and oil in automotive air conditioning systems
- Contains system safe leak sealer additive that seals common A/C leaks in rubber hoses, gaskets and O-rings
- Built in disposable recharge hose
- No tools required
- UNABLE TO SHIP THIS ITEM TO CALIFORNIA and WASHINGTON
- Replaces lost R-134a refrigerant and oil in automotive A/C system
- Eliminates moisture buildup and acid from A/C system to help extend A/C system life
- Contains acceptable amounts of ingredients: 14oz R-134a Refrigerant (1,1,1,2 Tetrafluoroethane, CAS# 811-97-2) & 8oz of synthetic lubricant enhancer, conditioner, with leak sealer.
- Contains R-134a gas which is acceptable for use in motor vehicle A/C (MVAC) systems
- UNIVERSAL - ZeroR AC Refrigerant is a hydrocarbon that safely bonds with chemicals like R134a, R1234YF and R12. We can only advertise this product to be used in R134a systems due to EPA regulations in the USA on both R12 and R1234YF systems. EPA also prohibits mixing refrigerant types. See the description for all legal disclaimers.
- EASY - This product installs just as easily as any R134a products. Cans even have R134a threads and the majority of R134a can taps will work for these cans.
- 6oz CANS - Refrigerants are compressed gasses and are measured by weight, not by liquid volume such as water. All gasses compress differently and produce a different weight. ZeroR AC Refrigerant is low weight compared to R134a, but its performance is equal to 16oz of R134a.
- ECO FRIENDLY – ZeroR AC Refrigerant is a 100% Natural gas unlike R134a, R1234yf and R12.
- SAFE – ZeroR AC Refrigerant has a class 2.1 flammability rating just like the new R1234YF which is now used in 100% of newly manufactured vehicles. Under normal operating conditions this product presents no danger to its users when handled properly and used in systems approved for flammable refrigerants.
- Replaces lost R-134a refrigerant and oil in automotive A/C system
- Extra long 24 inch recharge hose for accessing hard to reach service ports
- Reusable trigger dispenser with built in low pressure gauge and temperature dial indicator
- Contains R-134a gas which is acceptable for use in motor vehicle A/C (MVAC) systems
- Complies with Section 612 of the EPA Clean Air Act. EPA Compliant in Self Sealing Cans
- Freon(TM) 134a plus UV leak detector helps save mobile AC professionals time and money by combining the application of UV and refrigerant into one step to identify hard-to-find R-134a refrigerant leaks!
- Freon(TM) 134a UV is MADE IN THE USA and contains a high-technology dye formulation that meets the stringent requirements of SAE J2297 and AHRI700. The dye has been approved and used by OEMs, dealer service networks, and independent service shops for years.
- Add Freon(TM) 134a UV to a mobile AC system that does not contain any dye, start up the compressor, and let the dye do the work for you. The dye mixes with the lubricant and is quickly distributed through the system and helps to identify the R-134a leak in no time!
- USA Made - All R134a is brand new and made in the USA to the highest purity standards. This can be used to recharge 100% of R134a air conditioning systems.
- NEW GAS - SuperTech gas is brand new and never reclaimed or recycled. We purchase our R134a multiple times per year ensuring you get fresh made refrigerant. Old refrigerants can begin to rust and can cause performance issues if used.
- SSV CANS - Our cans are equipped with the 50 State compliant self-sealing valve design. You can store partially used R134a cans. Note, older can taps may not work on this valve type and you may need to purchase a R134a can tap to work with all SSV cans
- Complies with Section 612 of the EPA Clean Air Act
- Returns: This item is considered a HazMat Material and as such is not returnable. It requires hazmat certification to ship. Amazon does not supply a Return label and the seller will not supply return labels for this type of products.
- Replaces lost R-134a refrigerant and oil in automotive A/C system
- System safe stop leak sealer stops most common A/C leaks with hoses, gaskets and O-Rings
- Special anti-wear additives extend system life and improve performance
- Contains R-134a gas which is acceptable for use in motor vehicle A/C (MVAC) systems
- Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans
Last update on 2024-04-01 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.