| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V663
Manufacturer Honda (American Honda Motor Co.)
Components STEERING
Potential Number of Units Affected 54
Magnet Becomes Dislodged Reducing Steering Ability
The unintended steering input reduces vehicle maneuverability and increases the risk of a crash.
Summary
Honda (American Honda Motor Co.) is recalling certain 2017-2018 Honda Civic and CR-V vehicles. The magnet that controls the torque sensor output signal for the electronic power steering system may not be properly secured, allowing the magnet to become dislodged. During a full lock turn, the dislodged magnet may cause steering assist to be applied in the opposite direction.
Remedy
Honda will notify owners, and dealers will replace the steering gearbox assembly, free of charge. The recall is expected to begin November 5, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda’s numbers for this recall are C2N, P2O.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Honda has a Recall
Service Bulletin
A18-103
September 28, 2018
Version 1
Safety Recall: 2017-18 CR-V: Steering Gearbox
AFFECTED VEHICLES
| Year | Model | Trim | VIN Range |
| 2017-18 | CR-V | ALL | Check the iN VIN status for eligibility. |
BACKGROUND
Due to incorrect production of the steering gearbox torque sensor, the torque sensor magnet may shift from its normal position inside the gearbox. A shifted sensor magnet may cause the steering to move left or right unexpectedly, increasing the risk of a crash.
CUSTOMER NOTIFICATION
Owners of affected vehicles will be sent a notification of this campaign.
Do an iN VIN status inquiry to make sure the vehicle is shown as eligible.
Some vehicles affected by this campaign may be in your new or used vehicle inventory.
Failure to repair a vehicle subject to a recall or campaign may subject your dealership to claims or lawsuits from the customer or anyone else harmed as a result of such failure. To see if a vehicle in inventory is affected by this safety recall, do a VIN status inquiry before selling it.
CORRECTIVE ACTION
Replace the steering gearbox. Then, do a four-wheel alignment, followed by the steering angle neutral position learning procedure.
WARRANTY CLAIM INFORMATION
| Operation Number | Description | Flat Rate Time | Defect Code | Symptom Code | Template ID | Failed Part Number |
| 5131L9 | Replace steering gearbox. (Includes alignment and steering angle neutral position process EX, EX-L, and Touring AWD models
only) |
3.2 hrs | 6KS00 | P2O00 | A18103A | 53620-TLA-A12 |
| 5131L9 | Replace steering gearbox. (Includes alignment and steering angle neutral position
process LX AWD models only) |
3.2 hrs | 6KS00 | P2O00 | A18103B | 53620-TLA-A12 |
| 5131L8 | Replace steering gearbox. (Includes alignment and steering angle neutral position process EX, EX-L, and Touring 2WD models
only) |
2.6 hrs | 6KS00 | P2O00 | A18103C | 53620-TLA-A12 |
| 5131L8 | Replace steering gearbox. (Includes alignment and steering angle neutral position
process LX 2WD models only) |
2.6 hrs | 6KS00 | P2O00 | A18103D | 53620-TLA-A12 |
| 5131L8 | Replace steering gearbox. (Includes alignment and steering angle neutral position process VIN specific LX
2WD models only) |
2.6 hrs | 6KS00 | P2O00 | A18103E | 53620-TLA-A12 |
Skill Level: Repair Technician
PARTS INFORMATION
CR-V EX, EX-L, Touring AWD
| Part Name | Part Number | Quantity |
| Steering Gearbox (EX, EX-L, Touring AWD models only) | 53620-TLA-A12 | 1 |
| A Pipe Gasket | 18303-T2B-A01  |
1 |
| A Pipe Gasket | 18302-SP0-003 |
1 |
| Flange Nut (10 mm) | 90002-S10-000 |
4 |
| Bolt (14 mm x 73 mm) | 90108-TBA-A00 | 4 |
| Bolt (12 point 8 mm x 21 mm) (AWD only) | 90113-S10-000 |
8 |
| Flange Bolt (12 mm x 35 mm) | 90164-T0A-A00 |
2 |
| Flange Bolt (12 mm x 33 mm) | 90165-TLA-A00 | 4 |
| Flange Bolt (14 mm x 125 mm) | 90169-TLA-A01 | 1 |
| Flange Bolt (10 mm x 35 mm) | 90182-TLA-A00 | 4 |
| Nut (10 mm) | 90212-SA5-003 |
6 |
| Flange Bolt (10 mm x 29 mm) (AWD only) | 90382-SH9-003 | 2 |
CR-V LX AWD
| Part Name | Part Number | Quantity |
| Steering Gearbox ( LX AWD model only) | 53620-TLC-A12 | 1 |
| A Pipe Gasket | 18302-SP0-003 |
1 |
| A Pipe Gasket | 18303-T2B-A01 |
1 |
| Flange Nut (10 mm) | 90002-S10-000 |
4 |
| Bolt (14 mm x 73 mm) | 90108-TBA-A00 | 4 |
| Bolt (12 point 8 mm x 21 mm) (AWD only) | 90113-S10-000 |
8 |
| Flange Bolt (12 mm x 35 mm) | 90164-T0A-A00 |
2 |
| Flange Bolt (12 mm x 33 mm) | 90165-TLA-A00 | 4 |
| Flange Bolt (14 mm x 125 mm) | 90169-TLA-A01 | 1 |
| Flange Bolt (10 mm x 35 mm) | 90182-TLA-A00 | 4 |
| Nut (10 mm) | 90212-SA5-003 |
6 |
| Flange Bolt (10 mm x 29 mm) (AWD only) | 90382-SH9-003 | 2 |
CR-V EX, EX-L, Touring 2WD
| Part Name | Part Number | Quantity |
| Steering Gearbox (EX, EX-L, Touring 2WD models only) | 53620-TLB-A22 | 1 |
| A Pipe Gasket | 18303-T2B-A01 |
1 |
| A Pipe Gasket | 18302-SP0-003 |
1 |
| Flange Nut (10 mm) | 90002-S10-000 |
4 |
| Bolt (14 mm x 73 mm) | 90108-TBA-A00 | 4 |
| Flange Bolt (12 mm x 35 mm) | 90164-T0A-A00 |
2 |
| Flange Bolt (12 mm x 33 mm) | 90165-TLA-A00 | 4 |
| Flange Bolt (14 mm x 125 mm) | 90169-TLA-A01 | 1 |
| Flange Bolt (10 mm x 35 mm) | 90182-TLA-A00 | 4 |
| Nut (10 mm) | 90212-SA5-003 |
6 |
CR-V LX 2WD
| Part Name | Part Number | Quantity |
| Steering Gearbox (LX 2WD model only) | 53620-TLD-A02 | 1 |
| A Pipe Gasket | 18303-T2B-A01 |
1 |
| A Pipe Gasket | 18302-SP0-003 |
1 |
| Flange Nut (10 mm) | 90002-S10-000 |
4 |
| Bolt (14 mm x 73 mm) | 90108-TBA-A00 | 4 |
| Flange Bolt (12 mm x 35 mm) | 90164-T0A-A00 |
2 |
| Flange Bolt (12 mm x 33 mm) | 90165-TLA-A00 | 4 |
| Flange Bolt (14 mm x 125 mm) | 90169-TLA-A01 | 1 |
| Flange Bolt (10 mm x 35 mm) | 90182-TLA-A00 | 4 |
| Nut (10 mm) | 90212-SA5-003 |
6 |
TOOL INFORMATION
| Tool Name | Tool Number | Quantity |
| Subframe Adapter | VSB02C000016 | 1 |
REPAIR PROCEDURE
NOTE
For more information about the procedures listed below, refer to the service information.
- Set the steering column to the center tilt position and center telescopic position. Use the steering wheel holder tool to keep in place.
- Write down audio unit presets and disconnect the 12-volt battery.
- Raise the vehicle on a lift.
- Remove the front wheels.
- Disconnect the steering joint.
- Disconnect the tie-rod end ball joints on both sides of the vehicle.
- Remove the engine undercover.
- Disconnect the EPS subharness, and remove the connectors from the harness clips.
- Disconnect both sides of the stabilizer link from the stabilizer bar.
- Disconnect the front lower arm on both sides.
- Remove exhaust pipe A.
- Vehicle with AWD: Remove the propeller shaft.
- Remove the lower torque rod.
- Remove the front brace.
- Remove both front lower arm mounting bolts from the body.
- Set the subframe adapter on a transmission jack, line up the slots in the arms with the bolt holes on the corner of the jack base, and tighten the bolts.
- Attach the subframe adapter to the front subframe, and remove the bolts holding the subframe.
- Using the transmission jack, lower the front subframe until it drops from the body.
NOTE
Do not lower the front subframe more than required.
- Remove the steering gearbox through the opening between the body and the front subframe.
INSTALLATION
NOTE
During the assembly process, replace all required parts.
- Loosely install the new steering gearbox and new steering gearbox stiffeners to the front subframe with new mounting bolts.
- Tighten the mounting bolts to the specified torque in the numbered sequence shown.
- Install the pinion shaft grommet.
NOTICE
Install the grommet with the arrow facing towards the front of the vehicle.
- Install the front stabilizer bar bushing holder on both sides.
- Install the front lower arm mounting bolt on both sides of the body.
- Install the lower torque rod.
- Install the front brace.
- Vehicles with AWD: Install the propeller shaft.
- Install exhaust pipe A with new gaskets.
- Connect the lower arm ball joints on both sides.
- Connect the stabilizer link to the stabilizer bar.
- Connect the EPS subharness, and install the harness clip.
- Install the engine undercover.
- Connect the tie-rod end ball joints on both sides.
- Connect the steering joint.
- Install the front wheels.
- Connect the 12 volt battery.
- With the tires raised off the ground, check for the following symptoms on the steering gearbox by turning the steering wheel fully to the right and left several times. If you hear any of the symptoms listed below, check for a probable cause.
- Check these items with the vehicle on the ground:
- Start the engine, let it idle, and turn the steering wheel from lock to lock several times.
- Make sure the EPS indicator does not come on.
- Check the power steering assist.
- Confirm the steering wheel is centered. If not centered, check for proper engagement and/or alignment of the steering column coupler and steering gearbox spline.
- Do a four-wheel alignment.
- Do the steering angle neutral position learning procedure.
END
A18-103
September 28, 2018
Version 1
https://static.nhtsa.gov/odi/rcl/2018/RCRIT-18V663-1854.pdf
Loading...
Reload document 
Open in new tab
Manufacturer Notices(to Dealers,etc) – September 28, 2018 Subject 2017-18 Civic and CR-V EPS Gearbox Replacement Stop Sale & Safety Recalls
September 28, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V663-1002.pdf
Loading...
DEFECT INFORMATION REPORT
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V663-5289.pdf
Loading...
Recall Acknowledgement
October 15, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V663-7229.pdf
Loading...
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V663&docType=RCL
Bestseller No. 1
LAUNCH X431 PRO3S+Smartlink HD Heavy Duty Truck Scanner,2024 Top Diesel&Gasoline Bidirectional Diagnostic Scan Tool with J2534 Reprogramming,Topology Map,60+Service,ECU Coding,CANFD &DOIP,Free Update
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
Bestseller No. 2
LAUNCH X431 PRO5 Diagnostic Scanner, J2534 Reprogramming Tool with ECU Coding, Upgrade of X431 PRO3/V+, 50+ Service, Intelligent Diagnostics, Guided Functions, CAN FD/DoIP, 2-Year Free Update
- 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
- [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
- [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
- [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
- [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
Bestseller No. 3
XTOOL InPlus IP616 Diagnostic Tool with 31 Services, Lifetime Updates, 2024 Newest Car Scanner, Key Programming, CAN FD, All Systems Diagnoses, ABS Bleeding, Oil Reset, EPB, DPF, SAS, BMS, Throttle
- 🔥【2024 NEW RELEASE XTOOL DIAGNOSTIC TOOL】XTOOL InPlus IP616 OBD2 scanner diagnostic scan tool has packed ✅Lifetime Free Updates, ✅Android 10✅31 Services✅Up To 8 Live Data Graphing✅All Systems Diagnosis✅Key Programming✅CAN FD ✅Reflash Hidden Functions✅Export Data to CSV ✅Data View, etc, into this portable 7-Inch tablet, which makes it a great choice for DIYers, Car Owners, Retired Mechanics who need a portable add-on scan tool. 🚩Getting responsive answers via 📧 xtoolstore @ outl ook . c om📧
- 🔥【31 SERVICES】IP616 car diagnostic scanner covers 31 popular special functions of car service tools in the market, such as ABS Bleed, Oil Reset, DPF, EPB, BMS Reset, HV Battery, Power Balance, SAS, A/C Relearn, VGT Relearn Injector Coding, TPMS Reset, Throttle, Headlight, Crankshaft sensor Relearn, Suspension, Transmission Match, Tire Upgrade, etc 🚩Functions vary across vehicles. Come to us with VIN and functions to check the compatibility via QA or 📧 xtoolstore @ outl ook .c om📧.
- 🔥【ECU CONFIGURATION &KEY PROGRAMMING】XTOOL IP616 capable of both of these functions typically cost more than $600. Get the most out of your car today! Unlock hidden features and customize your car with ECU Configuration function. Say goodbye to annoying functions like daytime running lights and seat belt chimes. And that's not all; with key programming functions, like adding new keys and remote learning,etc. But remember, compatibility is key, so check your vehicle's VIN # before purchasing.
- 🔥【ALL SYSTEMS DIAGNOSIS & UP TO 8 LIVE DATA GRAPHING】InPlus IP616 car scanner tool can perform complete system diagnoses to read / clear trouble codes, view / graph live data PIDs like oil temperature, transmission fluid temperature, coolant temperature, engine speed, etc, retrieve freeze frame and read ECU Information. Graph up to 8 live data PIDs into one chart or display up to 8 individual graphs on one screen🚩NO Active tests and and Live data streams on each vehicles might be different.
- 🔥【CAN FD & 10,000+ VEHICLES COVERAGE & MULTILINGUAL】IP616 OBD2 scanner works on more than 10,000 vehicles globally, including brands of America, Europe, Asia, Australia, China and the coverage will grow continuously with frequent updates. IP616 also supports CAN FD protocol(for GM 2020+ MY), no need for adapters. Besides, IP616 is equipped with 14 languages, no worry about the language barrier.
Bestseller No. 4
MUCAR VO6 OBD2 Scanner for Car, OE-Level All Systems Diagnostic Scan Tool with 28 Services, Lifetime Free Update, IMMO/Key Programming, ABS Bleeding, ECU Flaut Codes，Wireless Diagnostic Scanner
- 【Wifi Upgrade】For a better experience, our system software will be updated frequently. It's recommended to update to the latest version when you receive the product.
- 【OE-LEVEL All System Diagnostic, Offline Scanning Supported】VO6 scan tool has the ability to access, diagnose, read/clear codes, text/graph live data for ENTIRE car systems including Body, Chassis, Powertrain, Fuel system, Light system, Engine, Transmission, ABS, SRS, TPMS, SAS, etc, quickly find car problems, turn off warning light(MIL). Offline diagnosis is supported even though there's no WiFi. Greatly helps car owners to maintain their vehicles in good condition.
- 【28+ Maintenance Functions】VO6 obd2 scanner provides 28 reset services for maintaining your cars efficiently, including Oil, EPB, TPMS, SAS Calibration, Injector Coding, ABS Bleeding, Battery Registration, Throttle Body Relearn, Headlight, Gear Learn, Gearbox, Suspension, IMMO Anti-theft Matching, Sunroof Initialization, Transport Mode, etc.
- 【Worldwide Compatibility & WiFi Free Update】VO6 scan tool can automatically identify vehicle information with auto VIN and starts auto-diagnose process, and it works on most OBDII-compliant vehicles worldwide in US, Europe, Asia, Africa, Australia for 12V cars, SUV, light truck, hybrids, and even roadster, automatically generate diagnostic report for further analysis. More importantly, bug fixes, newly added functionality, and new car model will continue to be updated for lifetime free.
- ⚠️We suggest that do not erase the codes before repairs or services have been performed. Codes will display again if the fault causing the code is not addressed. If you have any issues, welcome to email us at service@mucarco.com.
SaleBestseller No. 5
LAUNCH X431 PRO5 with Free J2534 ECU Reprogramming Tool for OEM Reprogramming and Diagnostics, 50+ Reset,OE-Level All Systems Bi-Directional Scanner for CANFD/DOIP/Heavy Duty Truck Scanner
- Featured with a brand-new upgrade system, X-431 PRO5 is newly designed for All Makes, All Models, and Full system diagnosis and assists the technician to make the vehicle diagnosis and repair easier at all skill levels.
- [J2534 ECU Reprogramming Tool, No IP Limitation]: LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 V+, PROS V1.0, PAD3. With the SmartBox3.0 can download the OEM software from the manufacturer’s server for free.
- [3 IN-1 FREE J2534 ECU Programming Device: LAUNCH X431 PRO5 support all new J2534/DOIP/CANFD protocols to access data and OE programming downloads for most Car; Support DC9-36V for HD Vehicle ( No NEED buy HD Module, SAVING $900+.)
- [ One-stop Intelligent Tools]: Workshop level scan tool X431 PRO5 with the repair fix solutions database, Code Assist, Repair Tips,Component Measurement, TSB, Relevant Cases,DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair.
- [50+ Reset, Continuously Updated Reset Functions]: 50 resets reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to regeneration, initiation, matching, etc.
Bestseller No. 6
OBD2 Scanner Bluetooth - Check Engine Light & Car Code Reader for iOS & Android with Free App NO Hidden FEES. Scan All car Systems with OEM-Level Diagnostics. Engine parameters Data. Stunning GAUGES!
- Full OBD2 Capabilities: This tool supports all 10 OBD Modes, giving you comprehensive diagnostic features for a thorough vehicle check-up. From read faults to freeze frame data, it provides everything you need for DIY repairs and maintenance. With Bluetooth connectivity, quick pairing technology, and low energy consumption, it offers wireless diagnostics that are both precise and accurate.
- Make Car Repairs Easy: Use your phone as an OBD2 scanner to identify issues with your vehicle. This car diagnostic tool is all about simplifying car repairs, offering solutions right at your fingertips. With it, you can quickly understand car problems, get repair recommendations.
- Professional Diagnostics in your pocket: Unlock professional-grade diagnostics with our car code reader in the comfort of your home. Our enhanced vehicle diagnostics tool lets you read and clear engine codes, ABS (Anti-lock Braking System) warnings, SRS (Supplemental Restraint System) alerts, and TPMS (Tire Pressure Monitoring System) signals. All results are stored as Diagnostics Reports and accessible anywhere & anytime.
- Easy-to-Use & FREE App: Our user-friendly interface is available on both iOS and Android, designed to make vehicle diagnostics straightforward.
- All the OBD2 Functions You need: Clear trouble codes, view live data streams, and monitor your vehicle's health with ease. The app also provides access to OEM DTC (Diagnostic Trouble Codes), VIN (Vehicle Identification Number), and ECU (Engine Control Unit) information, making diagnostics accessible to anyone. The app is completely free, one purchase gets you everything you need with no in-app fees or add-ons,
Bestseller No. 7
ANCEL V6 Plus+ OBD2 Scanner Diagnostic Tool Key Fob Programmer, All System Bluetooth Bidirectional Scan Tool with 25+ Services ABS/TPMS/EPB/IMMO/DPF/Battery/Oil Reset, Car Code Reader for All Vehicle
- ✅【2022 Update Obd2 Scanner Diagnostic Tool】ANCEL V6 Plus+ OBD2 Scanner Diagnostic Tool is an improved version of V6 Pro, upgraded from wired to wireless Bluetooth connection, while adding 10 advanced functions. V6 Plus+ supports bidirectional control, active testing, OE-level full diagnosis, 25 services, key programmer, auto VIN& Scan, and free updates 2 years.
- ✅【 25+ Special Service Hot Functions】ANCEL V6 Plus+ obd2 scanner diagnostic tool covers almost all commonly used services include Bidirectional Control, Active Test, key programmer, Oil Reset, ABS Brake Bleeding, EPB Service, SAS, DPF, BMS Reset, Throttle Reset, Injector Coding, Headlight, Transmission, A/F Settings, GEAR, NOX Set, PUMP, Seat Set, Stop/Start Reset, Tire Set, UREA Set,Sunroof, etc. 📣More new features will get after the update. ANCEL V6 Plus+ obd2 scanner diagnostic tool is to spend your less time and money to solve more problems.
- ✅【Car Key Programmer Tool】ANCEL V6 Plus+ is not only a car diagnostic tool, it is also a Car Key Programmer Tool, If your car key is lost or the key fob is broken, getting a replacement can be a hassle and cost you much money. ANCEL V6 Plus+ Bluetooth key fob programming tool allows you to Add a key/ new key programming, All keys replaced, Read keys from IMMO memory, Key cloning, etc., ❗Only some specific vhicles available now, pls confirm before purchase.
- ✅【Bi-Directional Control / Active Test】V6 Plus+ professional bi-directional scan tool can send commands and receive information to and from a vehicle’s onboard computer. Those commands will make the module perform specific tests and functions. Such as Window/Mirror/Door Lock Test, Fuel Pumps test, EGR test, Modulate the throttle and more. It is preferred by many car repair shop owners and professional mechanics, advanced DIYers to make it even easier to correctly repair vehicles.
- ✅【OE-Level Full System Diagnostics for Over 120+ Car Makers】ANCEL V6 Plus+ OBD2 Scanner works with 120+ car manufacturers and It works on 99% cars models made in 1996-2022, Let you more comprehensive and professional to diagnose ABS, SRS, Engine, Transmission, TPMS, Brake System, Suspension System, BODY and much more Possible cause of failure, And allows you can to quickly and accurately read and clear fault codes. if you meet any questions Give us your car’s VIN data and consult us anytime pls.
Bestseller No. 8
BC BossComm IFIX435 Scan Tool, All System(Not Only Transmission-ABS-SRS-Engine)Automotive OBD2 Scanner,Professional Diagnostic Tool for All Vehicles, Lifetime F-ree Update Code Reader, Live Data Graph
- 🎁🎁【Professional but Easier-to-use for Home】Tired of going to Autozone or other store to run codes, or having to pay the dealer to do it for you? IFIX435 code scanner is your ticket to happiness.Compared to the complexity of the car diagnostics available on the market with unit prices above $200, BOSSCOMM IFIX435 code reader is one of the best investments you can make!
- 🚘🚘【OE-Level All System Diagnostic Tool】Whether you're troubleshooting engine problems, abs, airbag, transmission issues, Bosscomm diagnostic tool easily find and fix the problem with your vehicle. IFIX435 obd2 scanner supports not only Engine, ABS, Transmission, but also EPB, TPMS, SAS, A/C, chassis and other system scans. By reading the ECU version information of each system, providing a🔥 live data stream, 🔥reading the trouble codes and🔥 retrieves freeze-frame, saving home repairers a lot of time and money in maintenance.
- 🚘🚘【Real Deal-LIVE DATA】Real-time, dynamic data is sure to streamline your work! BOSSCOMM IFIX435 car diagnostic scanner for all cars can get instant access to key information about your vehicle's RPM, oil temperature, and more, making diagnosis easier than ever before. Permitting you to see live information streams an even take previews and record this information for later playback.👍Easy to use without space limitations，and actuators to quickly uncover and solve any issues.
- 👍👍【Lifetime F-ree One-Click Update + Smart Auto V-IN】How much have you spent on car maintenance?The code reader is permanently updated for f-ree, which save you a lot of money in the long-term.Buy once and be set for life with this device. The car scanner with smart auto V-I-N technology identifies cars and it also supports manual input. You can connect to your home WiFi or personal hotspot to update it to get newest software and more car coverage.
- 👍👍【Wide Vehicle Coverage Global Mechanics】The BOSSCOMM IFIX435 code reader for cars and trucks can diagnose over 10000+ vehicles(60+ car brands) worldwide mainstream car makes(USA/ASIA/EUROPE), works on OBDII most after 1996 vehicles including the latest 2023 models.It supports 13 different languages at the same time, which can satisfy users all over the world.
SaleBestseller No. 9
BLCKTEC 440 Bluetooth OBD2 Scanner Diagnostic Tool - Car Code Reader and Scanner for Car - Comes with Live Data - Battery/Charging System Test - Works for All OBD Compliant Cars 1996 & Newer
- [Effortless Vehicle Health Management] - Master your vehicle’s diagnostics with the blcktec 440 obd2 scanner, the ultimate tool in car maintenance. This car check engine code reader not only simplifies the process of reading and clearing trouble codes but also enhances your diagnostic capabilities by providing comprehensive emissions readiness and system resets. It’s the go-to device for turning off CEL efficiently.
- [Precision Monitoring & Analysis] - Elevate your diagnostic experience with our OBD2 scanner’s live data graphing feature. Perfect for in-depth monitoring of your vehicle's real-time performance, this tool ensures you receive accurate error code interpretations for a broad range of vehicles including cars, SUVs, light trucks, and 12V diesels equipped with OBD2. A must-have for optimal vehicle performance assessment.
- [Expert-Recommended Tool] - Embrace the 440, a scanner for car diagnostics endorsed by leading mechanics for its superior capabilities. With its patented design, vibrant 2.8" color screen, and printer compatibility for easy report sharing, this scanner is a staple in professional DIY toolkits. It includes free lifetime updates and expert support, ensuring it’s a valued part of your diagnostic equipment.
- [Streamlined Smog Preparation] - Get smog test ready with the blcktech 440 code reader for cars and trucks. Designed for efficiency, its user-friendly I/M readiness hotkeys paired with clear, color-coded LEDs provide instant readiness status, making it an indispensable tool for emissions testing. Ideal for both novices and professionals, it simplifies compliance and enhances diagnostic workflows.
- [Plug-and-Play Convenience] - Ready to use right out of the box, the BLCKTEC OBD scanner powers up directly from your vehicle’s 16-pin DLC—no batteries needed. An essential tool for every toolbox, this scanner for car maintenance is ideal for both home mechanics and automotive DIYers, offering reliable diagnostics without the hassle.
Bestseller No. 10
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool-Black
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Last update on 2024-04-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.