Engine Rattles at Cold Start-Up – 2008-2013 Honda

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10108045

Manufacturer Communication Number: A09-010

 

Summary

SERVICE BULLETIN – AT COLD START-UP, THE ENGINE RATTLES LOUDLY FOR ABOUT 2 SECONDS. THE VARIABLE VALVE TIMING CONTROL (VTC) ACTUATOR IS DEFECTIVE.

 

 


9 Affected Products

Vehicles

MAKE MODEL YEAR
HONDA ACCORD 2008-2012
HONDA CR-V 2012-2013
HONDA CROSSTOUR 2012-2013

 


A09-010
February 25, 2017
05909 Version 5

 

Engine Rattles at Cold Start-Up

Supersedes 09-010, dated March 3, 2015, to revise the information highlighted in yellow.

 

REVISION SUMMARY

Under DIAGNOSIS, the audio/movie file was added.

 

AFFECTED VEHICLES

Year Model Trim VIN Range
2008–12 Accord ALL ALL
2012 CR-V ALL ALL
2013 CR-V 2WD 5J6RM3H…000001 thru 5J6RM3H…033075

2HKRM3H…000001 thru 2HKRM3H…513144

3CZRM3H…000001 thru 3CZRM3H…707736

2013 CR-V 4WD 5J6RM4H…000001 thru 5J6RM4H…067486

2HKRM4H…000001 thru 2HKRM4H…658914

2012 Crosstour 2WD ALL
2013 Crosstour 2WD 5J6TF3H…000001 thru 5J6TF3H…004260

 

SYMPTOM

At cold start-up, the engine rattles loudly for about 2 seconds.

 

POSSIBLE CAUSES

The variable valve timing control (VTC) actuator is defective.

 

CORRECTIVE ACTION

Replace the VTC actuator. This procedure does not require the complete removal of the cam chain and associated parts, so repair time is much shorter.

 

TOOL INFORMATION

Tool Name Tool Number Quantity
Stopper (lock pin) 14511-PNA-003 1
Tappet Adjuster 07MAA-PR70110 1
Tappet Lockout Wrench 07MAA-PR70120 1

 

REQUIRED MATERIALS

Part Name Part Number Quantity
Honda Bond HT 08718-0004 Engine Rattles at Cold Start-Up - 2008-2013 Honda | small light 1/10th of a tube (One tube repairs 10 vehicles.)

 

NOTE: Material costs = 1/10th of the current net part price (must be entered under the “Materials” section of the claim form)

 

PARTS INFORMATION

Part Name Part Number Quantity
VTC Actuator 14310-R5A-305 1

 

WARRANTY CLAIM INFORMATION

The normal warranty applies. NOTE: Different states have different warranty coverages 5/60K powertrain, 7/70k California emissions, and PZEV 15-150k. Use powertrain and emissions inquiry to confirm coverage.

Operation Number Description Flat Rate Time Defect Code Symptom Code Template ID Failed Part Number
1101Z9 Replace the VTC actuator. 2.0 hrs 03214 04216 09-010C 14310-R44-A01 Engine Rattles at Cold Start-Up - 2008-2013 Honda | small light

Skill Level: Repair Technician

 

DIAGNOSIS

If viewing this service bulletin on SIS and your computer has sound, click on the picture below to hear a sample of the engine’s rattle.

  1. Allow the engine oil to drain from the VTC system by not starting the engine for at least 6 hours.
  2. Start the engine and immediately listen for a loud rattle.

On start-up, do you hear a loud engine rattle that lasts about 2 seconds?

Yes – Go to REPAIR PROCEDURE

NO  ̶  If you hear a different noise, continue with normal troubleshooting.

If you do not hear an abnormal noise, get more information from the customer and, if needed, continue with normal troubleshooting.

 

REPAIR PROCEDURE

This procedure is in an outline form that you can also use as a checklist for the repair. If you need more details, refer to the service information for the following procedures:

  1. Remove the frame (strut) brace (if equipped).
  2. Remove the engine cover.
  3. Remove the ignition coil cover and the ignition coils.

ignition coils

 

  1. Remove the engine oil dipstick, then disconnect the breather hose and the brake booster vacuum hose from the cylinder head cover.

oil dipstick

 

  1. Remove the two bolts holding the EVAP canister purge valve bracket to the cylinder head.
  2. Remove the cylinder head cover.
  3. Raise the vehicle on a lift.
  4. Turn the front wheels or remove the right front wheel.
  5. Remove the splash shield to provide access to the crankshaft pulley.
  6. Remove the camshaft auto-tensioner (chain case) cover.
  7. Rotate the crankshaft clockwise to top dead center (TDC) No. 1 cylinder.
  8. Rotate the crankshaft counterclockwise to compress the auto-tensioner. Align the hole in the lock and auto-tensioner, then insert a 1.2 mm (0.05 in)-diameter stopper (lock pin).

auto-tensioner

 

  1. Rotate the crankshaft clockwise to TDC No. 1 cylinder.
  2. Lower the vehicle.
  3. Mark the timing chain at the punch marks on the exhaust camshaft sprocket and VTC actuator. Secure the chain to the sprocket with a wire tie.

camshaft sprocket

 

  1. Loosen the camshaft holder bolts, in sequence, two turns at a time.
  2. Remove the five camshaft holders. Set them aside on a clean surface in the exact order and position that they were removed from the cylinder head.
  3. Carefully tip up the end of the intake camshaft until there is enough slack for an assistant to lift the chain off the VTC actuator teeth.
  4. Remove the intake camshaft/VTC actuator assembly while the assistant keeps light tension on the chain. Place the camshaft/VTC actuator assembly on a clean, padded workbench.
  5. Secure the timing chain to the A/C compressor hose using a wire or zip tie to keep it from falling into the front cover.
  6. On the workbench, as an assistant holds the camshaft steady with an open-end wrench, remove the VTC actuator mounting bolt, then separate the VTC actuator from the camshaft. Discard the VTC actuator.

VTC actuator

 

  1. Before installing the new VTC actuator, make sure it is in the unlocked position.

VTC actuator

 

  1. Install the new, unlocked VTC actuator onto the camshaft; do not force it on.
  2. Once fitted, with the VTC actuator facing you, carefully rotate it counterclockwise until it engages the camshaft’s locator pin. When installed and rotated this way, the VTC actuator will not lock. Apply clean engine oil to the mounting bolt threads, then install the mounting bolt, finger tight.

NOTE:

  1. To unlock a locked VTC actuator, apply clean engine oil to the mounting bolt thread, then install the mounting bolt on the actuator, finger tight.
  2. Cover pressure port #1 on the camshaft with several layers of electrical tape. Secure the tape with a wire tie as shown.

camshaft

 

  1. Apply compressed air to pressure port #2. While compressed air is being applied to pressure port #2, rotate the VTC actuator by hand to the unlock position.

camshaft

VTC actuator

 

  1. Have an assistant hold the camshaft/VTC actuator assembly steady on the padded workbench with an open-end wrench. Use a torque wrench to torque the mounting bolt to 113 N·m (83 lb-ft).

 

VTC Actuator

 

NOTE: Be careful not to scratch or damage the camshaft. Also, do not use an impact wrench to tighten the mounting bolt; it will cause internal damage to the VTC actuator housing, vanes, or lockpin.

  1. After the mounting bolt is torqued, rotate the VTC actuator to the locked position.
  2. Remove the wire ties as an assistant keeps light tension on the chain.
  3. Slide the camshaft/VTC actuator in at an angle so that the chain can slip over the actuator’s teeth.
  4. Line up the marks you made on the chain with the punch marks on the exhaust camshaft sprocket and VTC actuator.

camshaft sprocket

 

  1. Apply engine oil to the journals and caps for both camshafts. Lower the camshaft/VTC actuator assembly onto its journals.
  2. Install the camshaft holders. Tighten them two turns at a time, starting in the middle and working your way outward, following the numbered sequence.

camshaft holders

 

  1. Remove the lock pin from the auto-tensioner.
  2. Rotate the crankshaft in the direction of engine rotation (clockwise) two full turns, then stop at the TDC mark. Make sure both camshafts line up as shown in step 15.

TDC mark

 

  1. Inside the cylinder block, visually confirm that the timing chain is properly riding on its guide, and has not slipped behind the guide in the block. If so, realign the chain as needed.
  2. Remove the old sealant, dry, reseal, then reinstall the auto-tensioner (chain case) cover.

NOTE: Wait 30 minutes before adding oil, (if needed), then wait 3 hours before starting the engine.

chain case cover

 

  1. Check the valve clearance using a tappet adjuster. Adjust if needed.

Intake: 0.21 – 0.25 mm (0.008 – 0.010 in)

Exhaust: 0.25 – 0.29 mm (0.010 – 0.011 in)

  1. Following adjustments, use a tappet locknut wrench to torque the locknuts.

Intake and Exhaust: 14 N·m (10 lb-ft)

  1. Raise the vehicle.
  2. Reinstall the splash shield.
  3. Straighten the wheels or reinstall the right front wheel (if removed).
  4. Lower the vehicle.
  5. Check the sparkplug seals for damage. If any seals are damaged, replace them. NOTE: Check the head cover gasket. Replace if needed.
  6. Install the head cover gasket in the groove.
  7. Remove the entire liquid gasket from the chain case and the No. 5 rocker shaft holder.
  8. Clean the head cover contacting surfaces with a clean shop towel.
  9. Reinstall the cylinder head cover, tightening the bolts in three steps. In the final step, torque all bolts in sequence to 12 N·m (8.7 lb-ft).

cylinder head cover

 

  1. Reinstall the EVAP canister purge valve bracket.
  2. Reinstall the engine oil dipstick and reconnect the breather hose and the brake booster vacuum hose.

oil dipstick

 

  1. Reinstall the ignition coils and the ignition coil cover.

ignition coils

 

  1. Reinstall the engine cover.
  2. Reinstall the frame (strut) brace (if equipped). Torque the bolts to 22 N·m (16 lb-ft).

 

END


1 Associated Document

Service Bulletin Document

A09-010
February 25, 2017
05909 Version 5

https://www.nhtsa.gov/recalls?nhtsaId=10108045

SB-10108045-9340.pdf 1092.451KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.04 MB]

 


NHTSA ID Number: 10087883

Manufacturer Communication Number: A09-010.V4

 

Summary

SERVICE BULLETIN – REPLACE THE VTC ACTUATOR IF THE ENGINE RATTLES LOUDLY FOR 2 SECONDS DURING COLD START-UP.

 

1 Associated Document

Service Bulletin Document

A09-010
March 17, 2016
01607 Version 4

https://www.nhtsa.gov/recalls?nhtsaId=10087883

SB-10087883-2280.pdf 797.667KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [778.97 KB]

 


NHTSA ID Number: 10087866

Manufacturer Communication Number: A09-010.V3

 

Summary

SERVICE BULLETIN – REPLACE THE VTC ACTUATOR IF THE ENGINE RATTLES LOUDLY FOR 2 SECONDS DURING COLD START-UP.

 

1 Associated Document

Service Bulletin Document

A09-010
March 15, 2016
01607 Version 3

https://www.nhtsa.gov/recalls?nhtsaId=10087866

SB-10087866-2280.pdf 803.023KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [784.20 KB]

 


NHTSA ID Number: 10056875

Manufacturer Communication Number: 09-010

 

Summary

HONDA: THERE IS A LOUD RATTLING NOISE COMING FROM ENGINE WHICH LAST FOR 2 SECONDS WHEN TEMPERATURE IS COLD. *LJ

 

1 Associated Document

Service Bulletin Document

A09-010
September 24, 2014

https://www.nhtsa.gov/recalls?nhtsaId=10056875

SB-10056875-8211.pdf 1103.302KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.05 MB]

 


 

SaleBestseller No. 1
Mobil 1 Advanced Fuel Economy Full Synthetic Motor Oil 0W-20, 5 Quart
  • Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.*
  • Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
  • Helps protect critical engine parts for up to 10,000 miles between oil changesm,** controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
Bestseller No. 2
Pennzoil Platinum Full Synthetic 0W-20 Motor Oil (5-Quart, Single)
  • Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
  • Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
  • Provides better fuel economy (based on the latest industry standards)
  • Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
  • No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
Bestseller No. 3
Castrol GTX Full Synthetic 0W-20 Motor Oil, 5 Quarts
  • Superior wear protection on critical engine parts
  • 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
  • Superior sludge cleaning and protection against new formation
  • 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
  • Full synthetic formula provides thermal and oxidation stability
Bestseller No. 4
Castrol Edge 0W-20 Advanced Full Synthetic Motor Oil, 5 Quarts
  • 3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade
  • 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
  • 6X better wear protection, Protection for 10,000 miles between oil changes
  • 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
  • Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
Bestseller No. 5
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil 5 QT
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
Bestseller No. 6
Amazon Basics Full Synthetic Motor Oil - 0W-20 - 5 Quart
  • 5 quarts of full synthetic motor oil; 0W-20; formulated for longer drain intervals
  • Prevents build up that can cause rust and corrosion
  • Reduces friction for less engine wear; helps reduce exhaust emissions
  • High resistance to viscosity and thermal breakdown
Bestseller No. 7
Quaker State Full Synthetic 0W-20 Motor Oil (5-Quart, Single Pack)
  • Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
  • Provides improved fuel economy (based on the latest industry standard)
  • Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
  • Formulated with high resistance to oxidation, keeping the oil fresher for longer.
  • Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
Bestseller No. 8
Pennzoil Platinum High Mileage Full Synthetic 0W-20 Motor Oil for Vehicles Over 75K Miles (5-Quart, Single)
  • Full synthetic 0W-20 engine oil designed for vehicles with over 70,000 miles that offers the same protection as SAE 5W-20 and is made with natural gas
  • Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
  • Keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
  • Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
  • Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
SaleBestseller No. 9
Pennzoil Ultra Platinum Full Synthetic 0W-20 Motor Oil (1-Quart, Single Pack)
  • Full synthetic 0W-20 engine oil with PurePlus Technology that is race trusted for extreme engine performance and is made with natural gas.
  • Pennzoil Ultra Platinum comes with warranty coverage of up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
  • No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
  • Far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6)
  • Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
Bestseller No. 10
Valvoline Extended Protection Full Synthetic Motor Oil SAE 0W-20 5 QT
  • ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
  • 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
  • 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
  • SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, dexos 1 Gen 2

Last update on 2024-03-22 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

7 thoughts on “Engine Rattles at Cold Start-Up – 2008-2013 Honda”

  1. I’m having the same issue with my 2010 Honda Accord. A service rep told me a few years back that I didn’t have to replace the actuator, Honda was aware of the issue and it wouldn’t cause any long term issues. Does that sound right?

    Is it really over a $1,000 to replace the Actuator?

    Reply
  2. I am The Honda Specialist in Fort Worth Texas. I would like to know if this satisfactorily repaired your Honda and how many miles have you driven since. I have gotten a lot of these and would like to help future customers.

    Reply
  3. If your Honda is out of warranty, and has less than 100k miles on it, and you’re having this issue with it, 1.) Take it to your dealer and have them document the issue, 2.) Bring it to the attention of the Service Manager and ask he/she if they’d be willing to ask their Honda Rep. for warranty help in this matter, 3.) If not, then call American Honda and politely ask to speak with “Goodwill warranty department”. Every auto manufacturer has one, but they don’t tell you that. 4.) Tell Honda Goodwill Dept. everything you did to try and get help to resolve the issue (they may ask for receipts), and tell them your vehicle has less than 100k miles on it, and that you are seeking any type of goodwill help that they can offer you.

    My 1st CR-V, a 2001 that I bought new, developed the dreaded receding exhaust valve seats issue that the ’99 to ’01’s had. The car had 55k miles on it when the issues began…Long story long, I paid out-of-pocket for 2 valve adjustments over time, because they wouldn’t pay for that, even though American Honda did keep the case open during that time period. At 93k, it was showing signs once again that it needed yet another valve adjustment, but I was told by the dealer that no further adjustments could be made, and the cylinder head would need to be replaced…at a cost of over $3,000!! Luckily, the service manager knew me for several years, since I always used their services with my previous Honda whenever I couldn’t handle doing repairs myself. (It didn’t hurt that I almost went into that field as well, so I’m pretty knowledgeable, and he knew that.) He called in their regional Honda Rep/Manager who met with me, and they called American Honda for approval, and they offered me some goodwill help. They paid for all labor, and I had to just pay for parts.

    At 93k miles, it was almost ready for a timing belt/water pump replacement, so they included that in the labor, since the front timing cover had to come off anyway. All-in-all, I paid only $837! Verses $3800 I would’ve had to shell out had I not gotten the goodwill help!

    One last thing… If your service manager refuses to help you acquire goodwill help from American Honda, (1st be sure to call them anyway to open a claim case…they’ll give you a case #), then go to another dealership. Try to find one that has won the “Honda President’s Award”. They are usually a better quality dealership, and want to win your patronage.

    Reply
  4. If this is a common issue for this range of hondas, why not just cover the replacement? I was just given a dealership quote for this issue of $2400.00. I feel like this is twice as much as it should cost, if anything at all. I love my 2009 Honda Accord with 102,000 miles and was hoping to pass it on to my kids as a first car. But that cost is extremely high for a fix that Ibam reading shouldn’t be more than 700 to 800 at most. The dealer said the parts were 1500 alone. I am just floored, especially since this is an issue for a large number of Hondas.
    May have to look at a different brand.

    Reply
  5. I fixed this problem by switching to High Mileage 5W-20 oil, and using Lucas High Mileage Oil Additive with each oil change. Check oil level monthly. This is not the manufacturer’s recommended OEM repair, but it’s $1,200 cheaper than replacing the actuator.

    Reply
  6. From what I am reading this is a known issue of these engines with Honda. If the VTC actuator has been replaced and it happens a second time within 15,000 miles, what is Honda’s stance? I have a 2014 Crosstour, original owner, less than 50,000 miles, VCT replaces once and problem is back. Local Honda store is not wanting to cover repair costs. Thanks for any advice or recommendations.

    Reply

Leave a Reply to Nisha Cancel reply

Share to...